On Sun, 2017-10-01 at 18:33 +0200, Tomasz CEDRO wrote: > On Wed, Sep 27, 2017 at 8:32 AM, Hans Petter Selasky <h...@selasky.org > > wrote: > > > > On 09/27/17 00:37, Ian Lepore wrote: > > > > > > > > > On Wed, 2017-09-27 at 00:30 +0200, Hans Petter Selasky wrote: > > > > > > > > > > > > On 09/27/17 00:11, Tomasz CEDRO wrote: > > > > > > > > > > > > > > > > > > > > https://github.com/freebsd/freebsd/pull/115 > > > > > > > > > > :-) > > > > > > > > > The devd.conf rule should match more than just vendor and > > > > product: > > > > > > > > > > > > +# Load GOBI 2000/3000 U3G QDL modem firmware on attach / boot. > > > > +# Note: This requires additional "gobi_loader" utility to be > > > > installed, > > > > +# as well as valid QDL driver firmware files placed in > > > > /boot/firmware/gobi. > > > > +# If modem does not accept valid firmware try gobi_loader > > > > -2000 > > > > switch. > > > > +# Please adjust modem VID/PID to match your device supported > > > > by > > > > u3g > > > > module. > > > > +#attach 100 { > > > > +# match "vendor" "0x04da"; > > > > +# match "product" "0x250e"; > > > > +# action "/usr/local/sbin/gobi_loader /dev/cuaU0 > > > > /boot/firmware/gobi/"; > > > > +#}; > > > > > > > > Else patch looks good. > > > > > > > > --HPS > > > > > > Hard-coding /dev/cuaU0 cannot possibly be right. > > > > > > -- Ian > > > > > These three lines are missing: > > > > match "system" "DEVFS"; > > match "subsystem" "CDEV"; > > match "type" "CREATE"; > > > > > > --HPS > Thanks! Updated! :-) > > https://github.com/freebsd/freebsd/pull/115 >
If this is to be an example, it should be correct. Please replace the "cuaU0" with "$cdev". (See /etc/devd/uath.conf for an example). -- Ian _______________________________________________ freebsd-usb@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"