On 10/01/17 19:09, Tomasz CEDRO wrote:
On Sun, Oct 1, 2017 at 6:40 PM, Ian Lepore <i...@freebsd.org> wrote:
On Sun, 2017-10-01 at 18:33 +0200, Tomasz CEDRO wrote:
On Wed, Sep 27, 2017 at 8:32 AM, Hans Petter Selasky <h...@selasky.org
wrote:

On 09/27/17 00:37, Ian Lepore wrote:


On Wed, 2017-09-27 at 00:30 +0200, Hans Petter Selasky wrote:


On 09/27/17 00:11, Tomasz CEDRO wrote:



https://github.com/freebsd/freebsd/pull/115

:-)

The devd.conf rule should match more than just vendor and
product:


+# Load GOBI 2000/3000 U3G QDL modem firmware on attach / boot.
+# Note: This requires additional "gobi_loader" utility to be
installed,
+#   as well as valid QDL driver firmware files placed in
/boot/firmware/gobi.
+#   If modem does not accept valid firmware try gobi_loader
-2000
switch.
+#   Please adjust modem VID/PID to match your device supported
by
u3g
module.
+#attach 100 {
+#      match "vendor" "0x04da";
+#      match "product" "0x250e";
+#      action "/usr/local/sbin/gobi_loader /dev/cuaU0
/boot/firmware/gobi/";
+#};

Else patch looks good.

--HPS

Hard-coding /dev/cuaU0 cannot possibly be right.

-- Ian

These three lines are missing:

         match "system"          "DEVFS";
         match "subsystem"       "CDEV";
         match "type"            "CREATE";


--HPS
Thanks! Updated! :-)

https://github.com/freebsd/freebsd/pull/115


If this is to be an example, it should be correct.  Please replace the
"cuaU0" with "$cdev".  (See /etc/devd/uath.conf for an example).

-- Ian

Thanks Ian! Is it okay now? I have moved this example to dedicated
/etc/devd/u3g.conf file, and added u3g load to /etc/devd/usb.conf.. if
syntax is okay I will verify on my laptop..

https://github.com/freebsd/freebsd/pull/115


Looks good to me. Don't forget to MFC!

--HPS
_______________________________________________
freebsd-usb@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to