On 3/27/2013 6:37 PM, Adrian Chadd wrote:
On 27 March 2013 16:35, Joshua Isom <jri...@gmail.com> wrote:

So far 22 hours uptime.  Other than what's probably debug messages,
everything seems to be working fine.

Please post the debug messages. Anything the driver spits out needs to
be fixed. :-)



Adrian


Maybe this way will be somewhat easy to work with.

[jri:~] jisom% dmesg | grep '\(ath\|ar9300\|wlan0\)' | uniq
ath0: <Atheros AR938x> mem 0xfdec0000-0xfdedffff irq 16 at device 0.0 on pci2
ar9300_set_stub_functions: setting stub functions
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: RX status length: 48
ath0: RX buffer size: 4096
ath0: TX descriptor length: 128
ath0: TX status length: 36
ath0: TX buffers per descriptor: 4
ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] 3 RX streams; 3 TX streams
ath0: AR9380 mac 448.3 RF5110 phy 0.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetAntennaSwitch: called
wlan0: Ethernet address: 64:70:02:18:6d:95
ath0: ath_edma_recv_proc_queue: handled npkts 0
ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
ath0: ath_edma_recv_proc_queue: handled npkts 0
ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
ath0: ath_edma_recv_proc_queue: handled npkts 0
ath0: ath_edma_tx_processq: Q1: empty?
ath0: ath_edma_recv_proc_queue: handled npkts 0
ar9300_reset[4253]: ar9300_stop_dma_receive failed
ath0: ath_edma_recv_proc_queue: handled npkts 0
wlan0: link state changed to DOWN
ath0: ath_edma_recv_proc_queue: handled npkts 0
wlan0: link state changed to UP
ath0: ath_edma_recv_proc_queue: handled npkts 0
ar9300_reset[4253]: ar9300_stop_dma_receive failed
ath0: ath_edma_recv_proc_queue: handled npkts 0
ar9300_reset[4253]: ar9300_stop_dma_receive failed
ath0: ath_edma_recv_proc_queue: handled npkts 0
ar9300_reset[4253]: ar9300_stop_dma_receive failed
ath0: ath_edma_recv_proc_queue: handled npkts 0
ar9300_reset[4253]: ar9300_stop_dma_receive failed
ath0: ath_edma_recv_proc_queue: handled npkts 0
ar9300_reset[4253]: ar9300_stop_dma_receive failed
ath0: ath_edma_recv_proc_queue: handled npkts 0
ar9300_reset[4253]: ar9300_stop_dma_receive failed
ath0: ath_edma_recv_proc_queue: handled npkts 0
wlan0: link state changed to DOWN
ath0: ath_edma_recv_proc_queue: handled npkts 0
wlan0: link state changed to UP
ath0: ath_edma_recv_proc_queue: handled npkts 0
wlan0: link state changed to DOWN
ath0: ath_edma_recv_proc_queue: handled npkts 0
wlan0: link state changed to UP
ath0: ath_edma_recv_proc_queue: handled npkts 0
wlan0: link state changed to DOWN
ath0: ath_edma_recv_proc_queue: handled npkts 0
wlan0: link state changed to UP
ath0: ath_edma_recv_proc_queue: handled npkts 0
ar9300_reset[4253]: ar9300_stop_dma_receive failed
ath0: ath_edma_recv_proc_queue: handled npkts 0
ar9300_reset[4253]: ar9300_stop_dma_receive failed
ath0: ath_edma_recv_proc_queue: handled npkts 0
ar9300_reset[4253]: ar9300_stop_dma_receive failed
ath0: ath_edma_recv_proc_queue: handled npkts 0
wlan0: link state changed to DOWN
ath0: ath_edma_recv_proc_queue: handled npkts 0
wlan0: link state changed to UP
ath0: ath_edma_recv_proc_queue: handled npkts 0
wlan0: link state changed to DOWN
ath0: ath_edma_recv_proc_queue: handled npkts 0
wlan0: link state changed to UP
ath0: ath_edma_recv_proc_queue: handled npkts 0
[jri:~] jisom% dmesg | grep 'ath0: ath_edma_recv_proc_queue: handled npkts 0' | 
wc -l
    1246

_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Reply via email to