diff the drivers between 9.x and 10.x; not much has changed.
Try running the 9.x sys/dev/iwn in 10.x, and make sure you use the 9.x
firmware. see if that fixes it.
On 10 January 2014 21:23, Erich Dollansky <er...@alogt.com> wrote:
> On Fri, 10 Jan 2014 21:02:36 -0800
> Kevin Oberman <rkober...@gmail.com> wrote:
>> Since upgrading my system to 10.0-RC# and now 10.0-RC5, by wireless
>> performance has severely degraded.
>> iwn0@pci0:3:0:0: class=0x028000 card=0x13118086 chip=0x00858086
>> rev=0x34 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'Centrino Advanced-N 6205 [Taylor Peak]'
>> class = network
> it seems that I have the same hardware and the same problem. While a
> device using run can connect to my access point without problems, iwn
> is not able to connect anymore. But, it connected earlier without any
> problems to other access points. iwn never hangs in my case, it is
> simply not able to connect.
> Successfully initialized wpa_supplicant
> wlan0: Trying to associate with 90:61:0c:13:36:fe (SSID='Sumarni'
> freq=2437 MHz) wlan0: Associated with 90:61:0c:13:36:fe
> wlan0: CTRL-EVENT-DISCONNECTED bssid=90:61:0c:13:36:fe reason=0
> wlan0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
> wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Some Name"
> auth_failures=1 duration=10
> With the same configuration, run0 connects without problems.
> How could I help to fix this problem?
> email@example.com mailing list
> To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"