The iwnfw module. It has paths into share for the firmware images.
On Jan 11, 2014 3:48 AM, "Erich Dollansky" <erichsfreebsdl...@alogt.com>
wrote:

> Hi,
>
> On Fri, 10 Jan 2014 21:45:59 -0800
> Adrian Chadd <adr...@freebsd.org> wrote:
>
> > Please help dig up which change broke it. Even just test out the head
> > iwn code from 6 months ago.
>
> I will try.
>
> One other question. Where do I find the firmware?
>
> Erich
> >
> > Adrian
> >  On Jan 11, 2014 12:36 AM, "Erich Dollansky"
> > <erichsfreebsdl...@alogt.com> wrote:
> >
> > > Hi,
> > >
> > > On Fri, 10 Jan 2014 21:24:46 -0800
> > > Adrian Chadd <adr...@freebsd.org> wrote:
> > >
> > > > diff the drivers between 9.x and 10.x; not much has changed.
> > > >
> > > > Try running the 9.x sys/dev/iwn in 10.x, and make sure you use
> > > > the 9.x firmware. see if that fixes it.
> > > >
> > > it was working on 10 until at least summer/fall of last year. I
> > > can't recall the precise date as I moved to cable by change. As it
> > > always worked outside, I never bothered to test.
> > >
> > > I will try to get the sources for 9.
> > >
> > > Erich
> > > >
> > > > -a
> > > >
> > > >
> > > > On 10 January 2014 21:23, Erich Dollansky <er...@alogt.com> wrote:
> > > > > Hi,
> > > > >
> > > > > On Fri, 10 Jan 2014 21:02:36 -0800
> > > > > Kevin Oberman <rkober...@gmail.com> wrote:
> > > > >
> > > > >> Since upgrading my system to 10.0-RC# and now 10.0-RC5, by
> > > > >> wireless performance has severely degraded.
> > > > >>
> > > > >> iwn0@pci0:3:0:0:    class=0x028000 card=0x13118086
> > > > >> chip=0x00858086 rev=0x34 hdr=0x00
> > > > >>     vendor     = 'Intel Corporation'
> > > > >>     device     = 'Centrino Advanced-N 6205 [Taylor Peak]'
> > > > >>     class      = network
> > > > >>
> > > > > it seems that I have the same hardware and the same problem.
> > > > > While a device using run can connect to my access point without
> > > > > problems, iwn is not able to connect anymore. But, it connected
> > > > > earlier without any problems to other access points. iwn never
> > > > > hangs in my case, it is simply not able to connect.
> > > > >
> > > > > Successfully initialized wpa_supplicant
> > > > > wlan0: Trying to associate with 90:61:0c:13:36:fe
> > > > > (SSID='Sumarni' freq=2437 MHz) wlan0: Associated with
> > > > > 90:61:0c:13:36:fe wlan0: CTRL-EVENT-DISCONNECTED
> > > > > bssid=90:61:0c:13:36:fe reason=0 wlan0: WPA: 4-Way Handshake
> > > > > failed - pre-shared key may be incorrect wlan0:
> > > > > CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Some Name"
> > > > > auth_failures=1 duration=10
> > > > >
> > > > > With the same configuration, run0 connects without problems.
> > > > >
> > > > > How could I help to fix this problem?
> > > > >
> > > > > Erich
> > > > > _______________________________________________
> > > > > freebsd-wireless@freebsd.org mailing list
> > > > > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> > > > > To unsubscribe, send any mail to
> > > > > "freebsd-wireless-unsubscr...@freebsd.org"
> > >
> > >
>
>
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Reply via email to