Hi, On Fri, 10 Jan 2014 21:45:59 -0800 Adrian Chadd <[email protected]> wrote:
> Please help dig up which change broke it. Even just test out the head > iwn code from 6 months ago. I will try. One other question. Where do I find the firmware? Erich > > Adrian > On Jan 11, 2014 12:36 AM, "Erich Dollansky" > <[email protected]> wrote: > > > Hi, > > > > On Fri, 10 Jan 2014 21:24:46 -0800 > > Adrian Chadd <[email protected]> wrote: > > > > > diff the drivers between 9.x and 10.x; not much has changed. > > > > > > Try running the 9.x sys/dev/iwn in 10.x, and make sure you use > > > the 9.x firmware. see if that fixes it. > > > > > it was working on 10 until at least summer/fall of last year. I > > can't recall the precise date as I moved to cable by change. As it > > always worked outside, I never bothered to test. > > > > I will try to get the sources for 9. > > > > Erich > > > > > > -a > > > > > > > > > On 10 January 2014 21:23, Erich Dollansky <[email protected]> wrote: > > > > Hi, > > > > > > > > On Fri, 10 Jan 2014 21:02:36 -0800 > > > > Kevin Oberman <[email protected]> wrote: > > > > > > > >> Since upgrading my system to 10.0-RC# and now 10.0-RC5, by > > > >> wireless performance has severely degraded. > > > >> > > > >> iwn0@pci0:3:0:0: class=0x028000 card=0x13118086 > > > >> chip=0x00858086 rev=0x34 hdr=0x00 > > > >> vendor = 'Intel Corporation' > > > >> device = 'Centrino Advanced-N 6205 [Taylor Peak]' > > > >> class = network > > > >> > > > > it seems that I have the same hardware and the same problem. > > > > While a device using run can connect to my access point without > > > > problems, iwn is not able to connect anymore. But, it connected > > > > earlier without any problems to other access points. iwn never > > > > hangs in my case, it is simply not able to connect. > > > > > > > > Successfully initialized wpa_supplicant > > > > wlan0: Trying to associate with 90:61:0c:13:36:fe > > > > (SSID='Sumarni' freq=2437 MHz) wlan0: Associated with > > > > 90:61:0c:13:36:fe wlan0: CTRL-EVENT-DISCONNECTED > > > > bssid=90:61:0c:13:36:fe reason=0 wlan0: WPA: 4-Way Handshake > > > > failed - pre-shared key may be incorrect wlan0: > > > > CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Some Name" > > > > auth_failures=1 duration=10 > > > > > > > > With the same configuration, run0 connects without problems. > > > > > > > > How could I help to fix this problem? > > > > > > > > Erich > > > > _______________________________________________ > > > > [email protected] mailing list > > > > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > > > > To unsubscribe, send any mail to > > > > "[email protected]" > > > > _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "[email protected]"
