Hi,

Yes there are issues; I'm too busy to try and chase them down.

I'd appreciate some help in chasing down why things are unhappy.

Thanks,


-a



On 27 February 2014 17:17, Kaho Toshikazu <vi...@elam.kais.kyoto-u.ac.jp> wrote:
>   Hello, -current members
>
>   I have a similar problem with Centrino Wireless-N 1000.
> It operated until r257951 and have a trouble after r258030.
> I use r262433 kernel with sys/dev/iwn reverted to r257951
> and changed from IEEE80211_FC1_WEP to EEE80211_FC1_PROTECTED.
>
> r262422 if_iwn module with IWN_DEBUG in opt_iwn.h and dev.iwn.0.debug=1 says:
>
> -- output of `dmesg -a` --
> iwn0: <Intel Centrino Wireless-N 1000> mem 0xd2500000-0xd2501fff irq 19 at 
> device 0.0 on pci2
> wlan0: Ethernet address: 00:1e:64:45:f5:64
> iwn0: iwn_setregdomain: invalid channel 8 freq 2447/0x20480
> iwn_notif_intr: scanning channel 1 status 1
> iwn_notif_intr: scanning channel 6 status 1
> iwn_notif_intr: scanning channel 11 status 1
> iwn_notif_intr: scanning channel 7 status 1
> iwn_notif_intr: scanning channel 13 status 1
> iwn_notif_intr: scanning channel 2 status 1
> iwn_notif_intr: scanning channel 3 status 1
> iwn_notif_intr: scanning channel 4 status 1
> iwn_notif_intr: scanning channel 5 status 1
> iwn_notif_intr: scanning channel 8 status 1
> iwn_notif_intr: scanning channel 9 status 1
> iwn_notif_intr: scanning channel 10 status 1
> iwn_notif_intr: scanning channel 12 status 1
> iwn_tx_data_raw: qid 3 idx 0 len 6 nsegs 1
> iwn5000_tx_done: qid 3 idx 0 retries 0 nkill 0 rate 420a duration 778 status 
> 201
> iwn_tx_data_raw: qid 3 idx 1 len 86 nsegs 1
> iwn5000_tx_done: qid 3 idx 1 retries 0 nkill 0 rate 420a duration 1418 status 
> 201
> iwn_set_link_quality: 1stream antenna=0x01, 2stream antenna=0x03, ntxstreams=1
> iwn_set_link_quality: i=0, txrate=7, rate=0x87
> iwn_set_link_quality: i=1, txrate=6, rate=0x86
> iwn_set_link_quality: i=2, txrate=5, rate=0x85
> iwn_set_link_quality: i=3, txrate=4, rate=0x84
> iwn_set_link_quality: i=4, txrate=3, rate=0x83
> iwn_set_link_quality: i=5, txrate=2, rate=0x82
> iwn_set_link_quality: i=6, txrate=1, rate=0x81
> iwn_set_link_quality: i=7, txrate=0, rate=0x80
> iwn_set_link_quality: i=8, txrate=0, rate=0x80
> iwn_set_link_quality: i=9, txrate=0, rate=0x80
> iwn_set_link_quality: i=10, txrate=0, rate=0x80
> iwn_set_link_quality: i=11, txrate=0, rate=0x80
> iwn_set_link_quality: i=12, txrate=0, rate=0x80
> iwn_set_link_quality: i=13, txrate=0, rate=0x80
> iwn_set_link_quality: i=14, txrate=0, rate=0x80
> iwn_set_link_quality: i=15, txrate=0, rate=0x80
> wlan0: link state changed to UP
> iwn0: iwn_intr: fatal firmware error
> firmware error log:
>   error type      = "SYSASSERT" (0x00000005)
>   program counter = 0x00018DBC
>   source line     = 0x00000032
>   error data      = 0x0000000100000000
>   branch link     = 0x00018D6E00018D6E
>   interrupt link  = 0x0000082600000000
>   time            = 1043083265
> driver status:
>   tx ring  0: qid=0  cur=0   queued=0
>   tx ring  1: qid=1  cur=0   queued=0
>   tx ring  2: qid=2  cur=0   queued=0
>   tx ring  3: qid=3  cur=2   queued=0
>   tx ring  4: qid=4  cur=57  queued=0
>   tx ring  5: qid=5  cur=0   queued=0
>   tx ring  6: qid=6  cur=0   queued=0
>   tx ring  7: qid=7  cur=0   queued=0
>   tx ring  8: qid=8  cur=0   queued=0
>   tx ring  9: qid=9  cur=0   queued=0
>   tx ring 10: qid=10 cur=0   queued=0
>   tx ring 11: qid=11 cur=0   queued=0
>   tx ring 12: qid=12 cur=0   queued=0
>   tx ring 13: qid=13 cur=0   queued=0
>   tx ring 14: qid=14 cur=0   queued=0
>   tx ring 15: qid=15 cur=0   queued=0
>   tx ring 16: qid=16 cur=0   queued=0
>   tx ring 17: qid=17 cur=0   queued=0
>   tx ring 18: qid=18 cur=0   queued=0
>   tx ring 19: qid=19 cur=0   queued=0
>   rx ring: cur=55
>
> -- output of `pciconf -lvcb` --
> iwn0@pci0:2:0:0:        class=0x028000 card=0x13058086 chip=0x00838086 
> rev=0x00 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Centrino Wireless-N 1000 [Condor Peak]'
>     class      = network
>     bar   [10] = type Memory, range 64, base 0xd2500000, size 8192, enabled
>     cap 01[c8] = powerspec 3  supports D0 D3  current D0
>     cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
>     cap 10[e0] = PCI-Express 1 endpoint max data 128(128) FLR link x1(x1)
>                  speed 2.5(2.5) ASPM L1(L0s/L1)
>     ecap 0001[100] = AER 1 0 fatal 0 non-fatal 3 corrected
>     ecap 0003[140] = Serial 1 001e64ffff45f564
>
> --
> Kaho Toshikazu
> _______________________________________________
> freebsd-curr...@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Reply via email to