Hi!

Would you mind clarifying what you wrote a little more?

What I'm reading this as:


* If I grab an r258030 tree, it's broken on your NIC
* If I then do what, apply r258034, it works?
* If I apply 258035 -> 258085, it also works?

I really would appreciate it if you would re-state what you've written
so I/we can better understand :-)

Something like:

* Revision X, doesn't work
* Revision X with revisions A, B and then C applied, does work
* Revision X with A, B and C applied, and a modified revision D
applied, does work (and attach the modified revision D)

That way I/we can clearly reproduce what you've done. :-)

Thanks!


-a


On 28 April 2014 23:05, Kaho Toshikazu <vi...@elam.kais.kyoto-u.ac.jp> wrote:
>   Hello,  sorry for too delay reply.
>
> During a holiday week in Japan, I traced changes of if_iwn.
>
>   r258030 broke and its problem were willing to be coverd by r258085,
> then slightly modified r258034 with changes from r258035 to r258085
> can operate normally.
>
>   r258035 introduced some program structure changes and some breakages.
> I cannot chase what is incorrect in r258035.
>
> --
> k...@elam.kais.kyoto-u.ac.jp
>
>> Date: Thu, 27 Feb 2014 19:40:26 -0800
>> Subject: Re: Centrino Wireless-N 1000 support is also broken (Re: iwn(4) in
>>  -HEAD supporting Centrino Wireless-N 135)
>> From: Adrian Chadd <adr...@freebsd.org>
>>
>> Hi,
>>
>> Yes there are issues; I'm too busy to try and chase them down.
>>
>> I'd appreciate some help in chasing down why things are unhappy.
>>
>> Thanks,
>>
>>
>> -a
>>
>>
>>
>> On 27 February 2014 17:17, Kaho Toshikazu <vi...@elam.kais.kyoto-u.ac.jp> 
>> wrote:
>> >   Hello, -current members
>> >
>> >   I have a similar problem with Centrino Wireless-N 1000.
>> > It operated until r257951 and have a trouble after r258030.
>> > I use r262433 kernel with sys/dev/iwn reverted to r257951
>> > and changed from IEEE80211_FC1_WEP to EEE80211_FC1_PROTECTED.
>> >
>> > r262422 if_iwn module with IWN_DEBUG in opt_iwn.h and dev.iwn.0.debug=1 
>> > says:
>> >
>> > -- output of `dmesg -a` --
>> > iwn0: <Intel Centrino Wireless-N 1000> mem 0xd2500000-0xd2501fff irq 19 at 
>> > device 0.0 on pci2
>> > wlan0: Ethernet address: 00:1e:64:45:f5:64
>> > iwn0: iwn_setregdomain: invalid channel 8 freq 2447/0x20480
>> > iwn_notif_intr: scanning channel 1 status 1
>> > iwn_notif_intr: scanning channel 6 status 1
>> > iwn_notif_intr: scanning channel 11 status 1
>> > iwn_notif_intr: scanning channel 7 status 1
>> > iwn_notif_intr: scanning channel 13 status 1
>> > iwn_notif_intr: scanning channel 2 status 1
>> > iwn_notif_intr: scanning channel 3 status 1
>> > iwn_notif_intr: scanning channel 4 status 1
>> > iwn_notif_intr: scanning channel 5 status 1
>> > iwn_notif_intr: scanning channel 8 status 1
>> > iwn_notif_intr: scanning channel 9 status 1
>> > iwn_notif_intr: scanning channel 10 status 1
>> > iwn_notif_intr: scanning channel 12 status 1
>> > iwn_tx_data_raw: qid 3 idx 0 len 6 nsegs 1
>> > iwn5000_tx_done: qid 3 idx 0 retries 0 nkill 0 rate 420a duration 778 
>> > status 201
>> > iwn_tx_data_raw: qid 3 idx 1 len 86 nsegs 1
>> > iwn5000_tx_done: qid 3 idx 1 retries 0 nkill 0 rate 420a duration 1418 
>> > status 201
>> > iwn_set_link_quality: 1stream antenna=0x01, 2stream antenna=0x03, 
>> > ntxstreams=1
>> > iwn_set_link_quality: i=0, txrate=7, rate=0x87
>> > iwn_set_link_quality: i=1, txrate=6, rate=0x86
>> > iwn_set_link_quality: i=2, txrate=5, rate=0x85
>> > iwn_set_link_quality: i=3, txrate=4, rate=0x84
>> > iwn_set_link_quality: i=4, txrate=3, rate=0x83
>> > iwn_set_link_quality: i=5, txrate=2, rate=0x82
>> > iwn_set_link_quality: i=6, txrate=1, rate=0x81
>> > iwn_set_link_quality: i=7, txrate=0, rate=0x80
>> > iwn_set_link_quality: i=8, txrate=0, rate=0x80
>> > iwn_set_link_quality: i=9, txrate=0, rate=0x80
>> > iwn_set_link_quality: i=10, txrate=0, rate=0x80
>> > iwn_set_link_quality: i=11, txrate=0, rate=0x80
>> > iwn_set_link_quality: i=12, txrate=0, rate=0x80
>> > iwn_set_link_quality: i=13, txrate=0, rate=0x80
>> > iwn_set_link_quality: i=14, txrate=0, rate=0x80
>> > iwn_set_link_quality: i=15, txrate=0, rate=0x80
>> > wlan0: link state changed to UP
>> > iwn0: iwn_intr: fatal firmware error
>> > firmware error log:
>> >   error type      = "SYSASSERT" (0x00000005)
>> >   program counter = 0x00018DBC
>> >   source line     = 0x00000032
>> >   error data      = 0x0000000100000000
>> >   branch link     = 0x00018D6E00018D6E
>> >   interrupt link  = 0x0000082600000000
>> >   time            = 1043083265
>> > driver status:
>> >   tx ring  0: qid=0  cur=0   queued=0
>> >   tx ring  1: qid=1  cur=0   queued=0
>> >   tx ring  2: qid=2  cur=0   queued=0
>> >   tx ring  3: qid=3  cur=2   queued=0
>> >   tx ring  4: qid=4  cur=57  queued=0
>> >   tx ring  5: qid=5  cur=0   queued=0
>> >   tx ring  6: qid=6  cur=0   queued=0
>> >   tx ring  7: qid=7  cur=0   queued=0
>> >   tx ring  8: qid=8  cur=0   queued=0
>> >   tx ring  9: qid=9  cur=0   queued=0
>> >   tx ring 10: qid=10 cur=0   queued=0
>> >   tx ring 11: qid=11 cur=0   queued=0
>> >   tx ring 12: qid=12 cur=0   queued=0
>> >   tx ring 13: qid=13 cur=0   queued=0
>> >   tx ring 14: qid=14 cur=0   queued=0
>> >   tx ring 15: qid=15 cur=0   queued=0
>> >   tx ring 16: qid=16 cur=0   queued=0
>> >   tx ring 17: qid=17 cur=0   queued=0
>> >   tx ring 18: qid=18 cur=0   queued=0
>> >   tx ring 19: qid=19 cur=0   queued=0
>> >   rx ring: cur=55
>> >
>> > -- output of `pciconf -lvcb` --
>> > iwn0@pci0:2:0:0:        class=0x028000 card=0x13058086 chip=0x00838086 
>> > rev=0x00 hdr=0x00
>> >     vendor     = 'Intel Corporation'
>> >     device     = 'Centrino Wireless-N 1000 [Condor Peak]'
>> >     class      = network
>> >     bar   [10] = type Memory, range 64, base 0xd2500000, size 8192, enabled
>> >     cap 01[c8] = powerspec 3  supports D0 D3  current D0
>> >     cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
>> >     cap 10[e0] = PCI-Express 1 endpoint max data 128(128) FLR link x1(x1)
>> >                  speed 2.5(2.5) ASPM L1(L0s/L1)
>> >     ecap 0001[100] = AER 1 0 fatal 0 non-fatal 3 corrected
>> >     ecap 0003[140] = Serial 1 001e64ffff45f564
>> >
>> > --
>> > Kaho Toshikazu
>
>
>
>
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Reply via email to