Hello,  sorry for too delay reply.

During a holiday week in Japan, I traced changes of if_iwn.

  r258030 broke and its problem were willing to be coverd by r258085,
then slightly modified r258034 with changes from r258035 to r258085
can operate normally.

  r258035 introduced some program structure changes and some breakages.
I cannot chase what is incorrect in r258035.

-- 
k...@elam.kais.kyoto-u.ac.jp

> Date: Thu, 27 Feb 2014 19:40:26 -0800
> Subject: Re: Centrino Wireless-N 1000 support is also broken (Re: iwn(4) in
>  -HEAD supporting Centrino Wireless-N 135)
> From: Adrian Chadd <adr...@freebsd.org>
>
> Hi,
> 
> Yes there are issues; I'm too busy to try and chase them down.
> 
> I'd appreciate some help in chasing down why things are unhappy.
> 
> Thanks,
> 
> 
> -a
> 
> 
> 
> On 27 February 2014 17:17, Kaho Toshikazu <vi...@elam.kais.kyoto-u.ac.jp> 
> wrote:
> >   Hello, -current members
> >
> >   I have a similar problem with Centrino Wireless-N 1000.
> > It operated until r257951 and have a trouble after r258030.
> > I use r262433 kernel with sys/dev/iwn reverted to r257951
> > and changed from IEEE80211_FC1_WEP to EEE80211_FC1_PROTECTED.
> >
> > r262422 if_iwn module with IWN_DEBUG in opt_iwn.h and dev.iwn.0.debug=1 
> > says:
> >
> > -- output of `dmesg -a` --
> > iwn0: <Intel Centrino Wireless-N 1000> mem 0xd2500000-0xd2501fff irq 19 at 
> > device 0.0 on pci2
> > wlan0: Ethernet address: 00:1e:64:45:f5:64
> > iwn0: iwn_setregdomain: invalid channel 8 freq 2447/0x20480
> > iwn_notif_intr: scanning channel 1 status 1
> > iwn_notif_intr: scanning channel 6 status 1
> > iwn_notif_intr: scanning channel 11 status 1
> > iwn_notif_intr: scanning channel 7 status 1
> > iwn_notif_intr: scanning channel 13 status 1
> > iwn_notif_intr: scanning channel 2 status 1
> > iwn_notif_intr: scanning channel 3 status 1
> > iwn_notif_intr: scanning channel 4 status 1
> > iwn_notif_intr: scanning channel 5 status 1
> > iwn_notif_intr: scanning channel 8 status 1
> > iwn_notif_intr: scanning channel 9 status 1
> > iwn_notif_intr: scanning channel 10 status 1
> > iwn_notif_intr: scanning channel 12 status 1
> > iwn_tx_data_raw: qid 3 idx 0 len 6 nsegs 1
> > iwn5000_tx_done: qid 3 idx 0 retries 0 nkill 0 rate 420a duration 778 
> > status 201
> > iwn_tx_data_raw: qid 3 idx 1 len 86 nsegs 1
> > iwn5000_tx_done: qid 3 idx 1 retries 0 nkill 0 rate 420a duration 1418 
> > status 201
> > iwn_set_link_quality: 1stream antenna=0x01, 2stream antenna=0x03, 
> > ntxstreams=1
> > iwn_set_link_quality: i=0, txrate=7, rate=0x87
> > iwn_set_link_quality: i=1, txrate=6, rate=0x86
> > iwn_set_link_quality: i=2, txrate=5, rate=0x85
> > iwn_set_link_quality: i=3, txrate=4, rate=0x84
> > iwn_set_link_quality: i=4, txrate=3, rate=0x83
> > iwn_set_link_quality: i=5, txrate=2, rate=0x82
> > iwn_set_link_quality: i=6, txrate=1, rate=0x81
> > iwn_set_link_quality: i=7, txrate=0, rate=0x80
> > iwn_set_link_quality: i=8, txrate=0, rate=0x80
> > iwn_set_link_quality: i=9, txrate=0, rate=0x80
> > iwn_set_link_quality: i=10, txrate=0, rate=0x80
> > iwn_set_link_quality: i=11, txrate=0, rate=0x80
> > iwn_set_link_quality: i=12, txrate=0, rate=0x80
> > iwn_set_link_quality: i=13, txrate=0, rate=0x80
> > iwn_set_link_quality: i=14, txrate=0, rate=0x80
> > iwn_set_link_quality: i=15, txrate=0, rate=0x80
> > wlan0: link state changed to UP
> > iwn0: iwn_intr: fatal firmware error
> > firmware error log:
> >   error type      = "SYSASSERT" (0x00000005)
> >   program counter = 0x00018DBC
> >   source line     = 0x00000032
> >   error data      = 0x0000000100000000
> >   branch link     = 0x00018D6E00018D6E
> >   interrupt link  = 0x0000082600000000
> >   time            = 1043083265
> > driver status:
> >   tx ring  0: qid=0  cur=0   queued=0
> >   tx ring  1: qid=1  cur=0   queued=0
> >   tx ring  2: qid=2  cur=0   queued=0
> >   tx ring  3: qid=3  cur=2   queued=0
> >   tx ring  4: qid=4  cur=57  queued=0
> >   tx ring  5: qid=5  cur=0   queued=0
> >   tx ring  6: qid=6  cur=0   queued=0
> >   tx ring  7: qid=7  cur=0   queued=0
> >   tx ring  8: qid=8  cur=0   queued=0
> >   tx ring  9: qid=9  cur=0   queued=0
> >   tx ring 10: qid=10 cur=0   queued=0
> >   tx ring 11: qid=11 cur=0   queued=0
> >   tx ring 12: qid=12 cur=0   queued=0
> >   tx ring 13: qid=13 cur=0   queued=0
> >   tx ring 14: qid=14 cur=0   queued=0
> >   tx ring 15: qid=15 cur=0   queued=0
> >   tx ring 16: qid=16 cur=0   queued=0
> >   tx ring 17: qid=17 cur=0   queued=0
> >   tx ring 18: qid=18 cur=0   queued=0
> >   tx ring 19: qid=19 cur=0   queued=0
> >   rx ring: cur=55
> >
> > -- output of `pciconf -lvcb` --
> > iwn0@pci0:2:0:0:        class=0x028000 card=0x13058086 chip=0x00838086 
> > rev=0x00 hdr=0x00
> >     vendor     = 'Intel Corporation'
> >     device     = 'Centrino Wireless-N 1000 [Condor Peak]'
> >     class      = network
> >     bar   [10] = type Memory, range 64, base 0xd2500000, size 8192, enabled
> >     cap 01[c8] = powerspec 3  supports D0 D3  current D0
> >     cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
> >     cap 10[e0] = PCI-Express 1 endpoint max data 128(128) FLR link x1(x1)
> >                  speed 2.5(2.5) ASPM L1(L0s/L1)
> >     ecap 0001[100] = AER 1 0 fatal 0 non-fatal 3 corrected
> >     ecap 0003[140] = Serial 1 001e64ffff45f564
> >
> > --
> > Kaho Toshikazu




_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Reply via email to