Also, do you run this with -bgscan ?
-a On 5 September 2014 12:26, Adrian Chadd <[email protected]> wrote: > Hi! > > This is just an iwn panic. Did your actual -HEAD kernel panic? > > Try doing this with sysctl dev.iwn.0.debug=0xff; let's see what > happens just before the firmware loses its mind. > > Thanks! > > > -a > > > On 5 September 2014 12:22, Oliver Pinter <[email protected]> wrote: >> I got the attached iwn panic, even if running in -ht mode. In between >> I have a working connection. >> I set up now a serial console and try to enable the ht mode with debugging. >> >> On 9/3/14, Oliver Pinter <[email protected]> wrote: >>> Or not, I forgot the -ht option in rc.conf. >>> >>> G STA + G AP = ok >>> G STA + N AP = ok >>> N STA + N AP = fail >>> >>> On 9/3/14, Oliver Pinter <[email protected]> wrote: >>>> Hi! >>>> >>>> Small status update: >>>> The mode N works too, I mistyped the other AP's passwork. >>>> So both mode G and mode N working after the backports. >>>> >>>> BTW, can you MFC the same changes to 10.1? >>>> >>>> On 9/2/14, Adrian Chadd <[email protected]> wrote: >>>>> Hi, >>>>> >>>>> Compile it with IWN_DEBUG, then >>>>> >>>>> sysctl dev.iwn.0.debug=0x1 >>>>> >>>>> >>>>> -a >>>>> >>>>> >>>>> On 2 September 2014 12:41, Oliver Pinter <[email protected]> wrote: >>>>>> I not tried freebsd-head yet, but I'm able today. In mode N seems like >>>>>> the NIC sends only one frame, and no more. >>>>>> >>>>>> With tcpdump and/or wlandebug I see only rx packets and no tx. >>>>>> >>>>>> If you add some pointer what changes must I create to easier debug, or >>>>>> what concrete information required, feel free to ping me or send the >>>>>> details. >>>>>> >>>>>> On 9/2/14, Adrian Chadd <[email protected]> wrote: >>>>>>> Cool! Have you tried freebsd-head? Does it work there? >>>>>>> >>>>>>> How's it failing in association state? What's it saying? >>>>>>> >>>>>>> >>>>>>> -a >>>>>>> >>>>>>> >>>>>>> On 2 September 2014 12:30, Oliver Pinter <[email protected]> >>>>>>> wrote: >>>>>>>> Hi All! >>>>>>>> >>>>>>>> After I backported all of the net80211 and iwn changes from >>>>>>>> 11-CURRENT >>>>>>>> to 10-STABLE the wireless NIC in subject working on mode G. If I try >>>>>>>> to use with mode N (ht20, ht40) it failed in association state. >>>>>>>> >>>>>>>> All of the backports are in this github repo: >>>>>>>> >>>>>>>> https://github.com/opntr/opBSD/commits/op/stable/10-iwn-backport >>>>>>>> >>>>>>>> Oliver >>>>>>> >>>>> >>>> >>> _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "[email protected]"
