Hi,
I've been playing around with an extra VPS on the same host. I used the same
base image as my original VPS, this was FreeBSD 9.0-RELEASE-p4. For
installation I first installed a bare minimum install, booted it, and using
portsnap and freebsd-update installed additional components.
I succesfully compiled a XENHVM kernel on that image, which boots just fine, on
both of my VPSes.
I can succesfully perform a freebsd-update to 9.1-RELEASE. If I then try to
compile and install a new kernel, things go awry, both with GENERIC and XENHVM.
I am fairly certain now that it has to do with the filesystem driver. I can
succesfull boot into single user mode, get the prompt about "bin/sh", and the
moment I press enter it goes into the loop printing "fpudna: fpcurthread ==
curthread 444 times"
Attached is the boot output.
Let me know if there is anything I can do to help track down the problem.
Jeroen.
______ ____ _____ _____
| ____| | _ \ / ____| __ \
| |___ _ __ ___ ___ | |_) | (___ | | | |
| ___| '__/ _ \/ _ \| _ < \___ \| | | |
| | | | | __/ __/| |_) |____) | |__| |
| | | | | | || | | |
|_| |_| \___|\___||____/|_____/|_____/ ``` `
s` `.....---.......--.``` -/
?????????????Welcome to FreeBSD???????????? +o .--` /y:` +.
? ? yo`:. :o `+-
? 1. Boot [Enter] ? y/ -/` -o/
? 2. [Esc]ape to loader prompt ? .- ::/sy+:.
? 3. Reboot ? / `-- /
? ? `: :`
? Options: ? `: :`
? 4. [A]CPI Support On ? / /
? 5. Safe [M]ode... off ? .- -.
? 6. [S]ingle User. off ? -- -.
? 7. [V]erbose..... off ? `:` `:`
? ? .-- `--.
? ? .---.....----.
???????????????????????????????????????????
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0: Fri Feb 1 20:13:55 CET 2013
root@:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Quad-Core AMD Opteron(tm) Processor 2374 HE (2200.08-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100f42 Family = 10 Model = 4 Stepping = 2
Features=0x1781fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x80802001<SSE3,CX16,POPCNT,HV>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x1f3<LAHF,CMP,CR8,ABM,SSE4A,MAS,Prefetch>
real memory = 536870912 (512 MB)
avail memory = 492613632 (469 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <Xen HVM>
ioapic0: Changing APIC ID to 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-47 on motherboard
kbd1 at kbdmux0
acpi0: <Xen> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x1f48-0x1f4b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc300-0xc30f at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> mem
0xf0000000-0xf1ffffff,0xf3000000-0xf3000fff at device 2.0 on pci0
pci0: <unknown> at device 3.0 (no driver attached)
re0: <RealTek 8139C+ 10/100BaseTX> port 0xc100-0xc1ff mem 0xf3001000-0xf30010ff
irq 32 at device 4.0 on pci0
re0: Chip rev. 0x74800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Ethernet address: 00:16:3e:2f:b7:22
re1: <RealTek 8139C+ 10/100BaseTX> port 0xc200-0xc2ff mem 0xf3001100-0xf30011ff
irq 36 at device 5.0 on pci0
re1: Chip rev. 0x74800000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rlphy1: <RealTek internal media interface> PHY 0 on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re1: Ethernet address: 00:16:3e:3e:64:c5
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc9000-0xc97ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0: No FDOUT register!
ctl: CAM Target Layer loaded
Timecounters tick every 10.000 msec
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <QEMU HARDDISK 0.10.2> ATA-7 device
ada0: 16.700MB/s transfers (WDMA2, PIO 8192bytes)
ada0: 52000MB (106496000 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
Timecounter "TSC" frequency 2200084590 Hz quality 800
Trying to mount root from ufs:/dev/ad0p3 [rw]...
fpudna: fpcurthread == curthread 1 times
______ ____ _____ _____
| ____| | _ \ / ____| __ \
| |___ _ __ ___ ___ | |_) | (___ | | | |
| ___| '__/ _ \/ _ \| _ < \___ \| | | |
| | | | | __/ __/| |_) |____) | |__| |
| | | | | | || | | |
|_| |_| \___|\___||____/|_____/|_____/ ``` `
s` `.....---.......--.``` -/
?????????????Welcome to FreeBSD???????????? +o .--` /y:` +.
? ? yo`:. :o `+-
? 1. Boot [Enter] ? y/ -/` -o/
? 2. [Esc]ape to loader prompt ? .- ::/sy+:.
? 3. Reboot ? / `-- /
? ? `: :`
? Options: ? `: :`
? 4. [A]CPI Support On ? / /
? 5. Safe [M]ode... off ? .- -.
? 6. [S]ingle User. On ? -- -.
? 7. [V]erbose..... off ? `:` `:`
? ? .-- `--.
? ? .---.....----.
???????????????????????????????????????????
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0: Fri Feb 1 20:13:55 CET 2013
root@:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Quad-Core AMD Opteron(tm) Processor 2374 HE (2200.30-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100f42 Family = 10 Model = 4 Stepping = 2
Features=0x1781fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x80802001<SSE3,CX16,POPCNT,HV>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x1f3<LAHF,CMP,CR8,ABM,SSE4A,MAS,Prefetch>
real memory = 536870912 (512 MB)
avail memory = 492613632 (469 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <Xen HVM>
ioapic0: Changing APIC ID to 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-47 on motherboard
kbd1 at kbdmux0
acpi0: <Xen> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x1f48-0x1f4b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc300-0xc30f at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> mem
0xf0000000-0xf1ffffff,0xf3000000-0xf3000fff at device 2.0 on pci0
pci0: <unknown> at device 3.0 (no driver attached)
re0: <RealTek 8139C+ 10/100BaseTX> port 0xc100-0xc1ff mem 0xf3001000-0xf30010ff
irq 32 at device 4.0 on pci0
re0: Chip rev. 0x74800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Ethernet address: 00:16:3e:2f:b7:22
re1: <RealTek 8139C+ 10/100BaseTX> port 0xc200-0xc2ff mem 0xf3001100-0xf30011ff
irq 36 at device 5.0 on pci0
re1: Chip rev. 0x74800000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rlphy1: <RealTek internal media interface> PHY 0 on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re1: Ethernet address: 00:16:3e:3e:64:c5
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc9000-0xc97ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0: No FDOUT register!
ctl: CAM Target Layer loaded
Timecounters tick every 10.000 msec
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <QEMU HARDDISK 0.10.2> ATA-7 device
ada0: 16.700MB/s transfers (WDMA2, PIO 8192bytes)
ada0: 52000MB (106496000 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
Timecounter "TSC" frequency 2200299140 Hz quality 800
Trying to mount root from ufs:/dev/ad0p3 [rw]...
Enter full pathname of shell or RETURN for /bin/sh:
fpudna: fpcurthread == curthread 1 times
fpudna: fpcurthread == curthread 2 times
_______________________________________________
freebsd-xen@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-xen
To unsubscribe, send any mail to "freebsd-xen-unsubscr...@freebsd.org"