[EMAIL PROTECTED] wrote:
I've converted my HDD to FAT, so for a "clear experiment" I can try the MS622.
As I understand I should now boot from A:, then install the mwave drivers and
allow them to overwrite the autoexec.bat and config.sys on MS floppy, then
reboot from floppy again and see if the mwave drivers were correctly loaded?
------- Original message -------
From: [EMAIL PROTECTED]
To: [email protected]
Subject: Re: [Freedos-user] Soundblaster setup
Date: Sunday 09 October 2005 16:51
BTW my HDD is formatted as Fat32, so I think this is the problem.
You should have used MS-DOS v7 (which ships with Windows 9x), which
supports FAT32!
http://www.mbhs.edu/~jaosborn/boot98se.exe
Try that. It is a self-extracting zip archive, so extract it with e.g
InfoZIP. On Linux you can then run the following to write it to a diskette:
dd if=winb98se.IMA of=/dev/fda
See if you can have the Mwave driver installer write the required
changes to CONFIG.SYS and AUTOEXEC.BAT to new files (e.g. *.001). Then
you can incorporate the changes into your FreeDOS CONFIG.SYS and
AUTOEXEC.BAT.
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Freedos-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freedos-user
