Hi again, If all you need is to make your own .ISO to burn to CD, try this:
mkisofs -R -D -V "FreeDOS 1.1rc1" -o ~/fdbasecd-remastered.iso \ -b isolinux/isolinux.bin -c isolinux/boot.cat \ -no-emul-boot \-boot-load-size 4 \ -boot-info-table /tmp/fdbasecd-contents/ On Tue, Aug 30, 2011 at 1:31 AM, iw2evk <marinellucc...@tiscali.it> wrote: > > Rugxulo wrote: >> >> On Tue, Aug 23, 2011 at 5:03 AM, iw2evk <marinellucc...@tiscali.it> wrote: >>> >>> for working with some pc programmable radio transceivers, i' need a >>> bootable >>> cd with freedos and panasonic usb drivers (di100'ddanf usbaspi etc). >> >> Sounds complicated. :-) >> >>> I've tried the bets cd from freedos 1.1. but failed emm management and >>> breth >>> usb drivers. >> >> Have you tried latest test #3 ? Do you have access to a working floppy >> drive? >> >> Yes, i've used release 3. Ireload via command line jemm after failure , >> but >> usb driver found a " legacy" .Bios don't have a choice for usb legacy, so >> i 've loadede >> usb driver with usb legacy remove option.When i load usbdrive , the system >> hang up! >> >> Try using F8 to avoid (J)EMM386. Does that help? >> BTW, make sure to use Bret's latest, but even that is UHCI only. >> >>> How i can create a bootable cd rom with freedos 1.1. full and panasonic >>> drivers. >>> Now i run on main pc Linux puppy lucid 5.2.5 and on older pc without usb >>> fredoos 1.0 >> >> How old? It can't be that old (before 2000) if you're using USB. You >> may have to roll your own .ISO via mkisofs or similar. Unfortunately, >> I don't think we're allowed to redistribute Panasonic drivers. >> >> My second pc , where now running kenwood and ascom radio service software >> it'a a >> toshiba t 1950tc bios date 1993 , no usb, no cd only floppy. >> My other pc have usb /cd rw but NOT floppy (i've buy a chinese usb floppy >> on e bay). >> So i can't transfer configuration files for radio from one pc to other. >> >> I find it somewhat hard to believe that you need "full" FreeDOS >> install here. Try just manually grabbing "BASE" (plus maybe "UTIL") >> and whatever extras you need. >> >> In releade 3 cd i've found in install/ odin/ the new software, but this is >> not a bootable disk >> for reistall on older pc last version of freedos. >> >> P.S. (Sorry this isn't as helpful as I would've liked.) >> Many thanks for your help , very friendly ------------------------------------------------------------------------------ Special Offer -- Download ArcSight Logger for FREE! Finally, a world-class log management solution at an even better price-free! And you'll get a free "Love Thy Logs" t-shirt when you download Logger. Secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsisghtdev2dev _______________________________________________ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user