On 18 July 2013 19:50, Petr Viktorin <pvikt...@redhat.com> wrote:
> On 07/18/2013 03:31 AM, Pete Brown wrote:
>>
>> I opened all the ports that seemed to be listening n the master.
>> I also ran the setup again without disabling the connection check to
>> see what else needed fixing.
>> It seems after much investigation and log dredging it seems my admin
>> password had expired.
>> I wasn't aware that was possible.
>> I reset the password and it seemed to get further.
>> This for some reason not mentioned in the documentation the replica is
>> trying to ssh into the master as admin.
>> I managed to fix that by changing my setup and ssh config files.
>>
>> Then it actually managed to start the setup process.
>> But again it fails at exactly the same point mentioned in my initial
>> email.
>>
>> After some further digging with reference to the log output below it
>> seems I have run into a bug that seems to have been fixed.
>> https://fedorahosted.org/freeipa/ticket/3213
>> As I mentioned I am running current Fedora 18 so freeipa is
>> 3.1.5-1.fc18 is that fixed in my version?
>
>
> Yes, that bug was fixed in 3.1.0.

Well the script is still complaining about not being able to find
dogtag_master_ds_port and the option still appears in my version of
the script.
Which from the bug seems to be what was causing the issue and the
ipareplica-install log I included below says this is the case.
It seems a bit odd because this is a fresh install of 3.1.5.



>> It also seems the dogatg and IPA directories will be or have been merged?
>> Which version did this happen in and will it get applied to my server?
>
>
> Also in 3.1.0; new servers installed using that version have merged
> databases.

I still seem to have split instances.
I did the install before Fedora 18 was released because I wanted ipa 3
and that was the only way I could get it.
Will they get merged at some point or can I do it manually?

>
>> Can anyone suggest how I go about fixing this issue?
>
>
> Well, ipa-server-uninstall can misbehave if CA installation goes wrong
> (ticket #2796).
> So I would start by uninstalling, then running the following command to make
> sure CA is not left:
>     sudo pkidestroy -s CA -i pki-tomcat
> then installing again.

Ran that on my replica after the install and before the clean and it said this.
That would make sense because it fails during the ca creation stage.

root@ipa2 ~]# pkidestroy -s CA -i pki-tomcat
ERROR:  PKI instance '/var/lib/pki/pki-tomcat' does NOT exist!


>
> Can you also provide logs without the --skip-conncheck flag? Specifically
> the /var/log/ipareplica-conncheck.log should be interesting.

>From what I can tell all the tests in the connection check passed.

>
>
>> I wanted to create a replica so I could upgrade to fedora 19 and not
>> have to take my single instance of FreeIPA offline while that was
>> happening.
>> Will I need to upgrade to Fedora 19 to fix my issue?
>
>
>
>> For reference this is the point of failure in the
>> /var/log/ipareplica-install.log file
>>
>> 2013-07-18T01:06:16Z DEBUG Starting external process
>> 2013-07-18T01:06:16Z DEBUG args=/usr/sbin/pkispawn -s CA -f /tmp/tmpFKBxMW
>> 2013-07-18T01:08:16Z DEBUG Process finished, return code=1
>> 2013-07-18T01:08:16Z DEBUG stdout=Loading deployment configuration
>> from /tmp/tmpFKBxMW.
>> ERROR:  Unable to access security domain: 503 Server Error: Service
>> Unavailable
>
>
> Please also check logs on the existing server. Is the CA available?
> Does e.g. `ipa cert-show 1` work?
>
>> 2013-07-18T01:08:16Z DEBUG stderr=
>> 2013-07-18T01:08:16Z CRITICAL failed to configure ca instance Command
>> '/usr/sbin/pkispawn -s CA -f /tmp/tmpFKBxMW' returned non-zero exit
>> status 1
>> 2013-07-18T01:08:16Z INFO   File
>> "/usr/lib/python2.7/site-packages/ipaserver/install/installutils.py",
>> line 619, in run_script
>>      return_value = main_function()
>>
>>    File "/usr/sbin/ipa-replica-install", line 652, in main
>>      (CA, cs) = cainstance.install_replica_ca(config,
>> dogtag_master_ds_port)
>>
>>    File
>> "/usr/lib/python2.7/site-packages/ipaserver/install/cainstance.py",
>> line 1809, in install_replica_ca
>>      subject_base=config.subject_base)
>>
>>    File
>> "/usr/lib/python2.7/site-packages/ipaserver/install/cainstance.py",
>> line 625, in configure_instance
>>      self.start_creation(runtime=210)
>>
>>    File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py",
>> line 358, in start_creation
>>      method()
>>
>>    File
>> "/usr/lib/python2.7/site-packages/ipaserver/install/cainstance.py",
>> line 744, in __spawn_instance
>>      raise RuntimeError('Configuration of CA failed')
>>
>> 2013-07-18T01:08:16Z INFO The ipa-replica-install command failed,
>> exception: RuntimeError: Configuration of CA failed
>>
>> On 17 July 2013 15:52, Pete Brown <rendhal...@gmail.com> wrote:
>>>
>>> Hi everyone,
>>>
>>> I am attempting to create a replica of my freeipa server.
>>> I am following the docs but they are not working for me.
>>> I am getting the vague impression I am missing a step that doesn't
>>> seem to be documented.
>>>
>>> For the record all the posts listed are open and it was a clean
>>> install of Fedora 18.
>>>
>>> I thought the server may need to be a client of the master before I
>>> set it up as a replica but it just said I needed to uninstall the
>>> client setup.
>>>
>>> After running ipa-replica-prepare on the master and scping the file to
>>> the new replica.
>>> I ran this command on the new replica
>>> ipa-replica-install --setup-ca --mkhomedir --ssh-trust-dns --setup-dns
>>> --forwarder=XXX.XXX.XXX.XX --forwarder=XX.XXX.XXX.XXX
>>> /var/lib/ipa/replica-info-ipa2.domain.com.gpg
>>>
>>> The error I am seeing is from that command is this:
>>> Cannot acquire Kerberos ticket: kinit: Cannot read password while
>>> getting initial credentials
>>>
>>> Connection check failed!
>>> Please fix your network settings according to error messages above.
>>> If the check results are not valid it can be skipped with
>>> --skip-conncheck parameter.
>>>
>>> So I cleaned everything off (i think) and tried it with this command
>>>
>>> ipa-replica-install --setup-ca --mkhomedir --ssh-trust-dns --setup-dns
>>> --forwarder=61.9.211.33 --forwarder=61.9.211.1 --skip-conncheck
>>> /var/lib/ipa/replica-info-ipa2.webgatetec.com.gpg
>>>
>>> This seems to actually start the install and setup process i remember
>>> from installing the ipa server initially
>>>
>>> This it fails with this output
>>>
>>> WARNING: conflicting time&date synchronization service 'chronyd' will
>>> be disabled in favor of ntpd
>>>
>>> Directory Manager (existing master) password:
>>>
>>> Configuring NTP daemon (ntpd)
>>>    [1/4]: stopping ntpd
>>>    [2/4]: writing configuration
>>>    [3/4]: configuring ntpd to start on boot
>>>    [4/4]: starting ntpd
>>> Done configuring NTP daemon (ntpd).
>>> Configuring directory server (dirsrv): Estimated time 1 minute
>>>    [1/31]: creating directory server user
>>>    [2/31]: creating directory server instance
>>>    [3/31]: adding default schema
>>>    [4/31]: enabling memberof plugin
>>>    [5/31]: enabling winsync plugin
>>>    [6/31]: configuring replication version plugin
>>>    [7/31]: enabling IPA enrollment plugin
>>>    [8/31]: enabling ldapi
>>>    [9/31]: configuring uniqueness plugin
>>>    [10/31]: configuring uuid plugin
>>>    [11/31]: configuring modrdn plugin
>>>    [12/31]: configuring DNS plugin
>>>    [13/31]: enabling entryUSN plugin
>>>    [14/31]: configuring lockout plugin
>>>    [15/31]: creating indices
>>>    [16/31]: enabling referential integrity plugin
>>>    [17/31]: configuring ssl for ds instance
>>>    [18/31]: configuring certmap.conf
>>>    [19/31]: configure autobind for root
>>>    [20/31]: configure new location for managed entries
>>>    [21/31]: restarting directory server
>>>    [22/31]: setting up initial replication
>>> Starting replication, please wait until this has completed.
>>> Update in progress
>>> Update in progress
>>> Update in progress
>>> Update in progress
>>> Update succeeded
>>>    [23/31]: adding replication acis
>>>    [24/31]: setting Auto Member configuration
>>>    [25/31]: enabling S4U2Proxy delegation
>>>    [26/31]: initializing group membership
>>>    [27/31]: adding master entry
>>>    [28/31]: configuring Posix uid/gid generation
>>>    [29/31]: enabling compatibility plugin
>>>    [30/31]: tuning directory server
>>>    [31/31]: configuring directory to start on boot
>>> Done configuring directory server (dirsrv).
>>> Configuring certificate server (pki-tomcatd): Estimated time 3 minutes
>>> 30 seconds
>>>    [1/17]: creating certificate server user
>>>    [2/17]: configuring certificate server instance
>>> ipa         : CRITICAL failed to configure ca instance Command
>>> '/usr/sbin/pkispawn -s CA -f /tmp/tmptGcdgB' returned non-zero exit
>>> status 1
>>>
>>> Your system may be partly configured.
>>> Run /usr/sbin/ipa-server-install --uninstall to clean up.
>>>
>>> Configuration of CA failed
>>>
>>> I even tried cleaning it again at that point and made sure all the
>>> ports were open and still got the same error.
>>>
>>> I also switched selinux to permissive mode cleaned up and rebooted but
>>> that didn't help either
>>>
>>> Can someone please point out what I need to do to get this working.
>>>
>>> Thanks in advance.
>>> Pete.
>>
>>
>> _______________________________________________
>> Freeipa-users mailing list
>> Freeipa-users@redhat.com
>> https://www.redhat.com/mailman/listinfo/freeipa-users
>>
>
>
> --
> Petrł

_______________________________________________
Freeipa-users mailing list
Freeipa-users@redhat.com
https://www.redhat.com/mailman/listinfo/freeipa-users

Reply via email to