On Fri, 2007-12-07 at 15:49 +0530, Sharad Chandra wrote: > Hi, > > > > > Do you happen to have another IPMI card for that system? I am still > > wondering if that card is bad. Although I no longer have a motherboard > > from that specific Supermicro product line, I know that FreeIPMI has > > worked fine before and (at minimum) has been able to detect the IPMI card > > properly. > > > > Changing the card helped, Now i can read 19 sensors that includes (Fan, > Voltage, Temperature, and one Platform Chassis Intrusion, and one Power > Supply). But I think there should be around 100s of sensors. > > How to make sure there are only 19 sensors? Do i need to talk vendor for the > list?
Hey Sharad, That's good news. I guess the IPMI card was just bad. I suppose the only "official" way is to get a list from the vendor. But 19 sensors seems to be about right. As a comparison, on my Supermicro board, which has 4 sockets/8cores, I have 29 sensors. 3: CPU1 Temp (Temperature): 19.00 C (NA/78.00): [OK] 4: CPU2 Temp (Temperature): 21.00 C (NA/78.00): [OK] 5: CPU3 Temp (Temperature): 59.00 C (NA/78.00): [OK] 6: CPU4 Temp (Temperature): 44.00 C (NA/78.00): [OK] 7: Sys Temp (Temperature): 28.00 C (NA/78.00): [OK] 8: CPU1 Vcore (Voltage): 1.26 V (1.06/1.63): [OK] 9: CPU2 Vcore (Voltage): 1.26 V (1.06/1.63): [OK] 10: CPU3 Vcore (Voltage): 1.22 V (1.04/1.65): [OK] 11: CPU4 Vcore (Voltage): 1.23 V (1.04/1.65): [OK] 12: 3.3V (Voltage): 3.25 V (2.93/3.66): [OK] 13: 5V (Voltage): 4.80 V (4.44/5.54): [OK] 14: 12V (Voltage): 12.10 V (10.56/13.44): [OK] 15: 5VSB (Voltage): 4.80 V (4.44/5.54): [OK] 16: VBAT (Voltage): 3.07 V (2.93/3.66): [OK] 17: Fan1 (Fan): 5000.00 RPM (300.00/NA): [OK] 18: Fan2 (Fan): 5000.00 RPM (300.00/NA): [OK] 19: Fan3/CPU2 (Fan): 0.00 RPM (300.00/NA): [At or Below (<=) Lower Non- Recoverable Threshold] 20: Fan4/CPU1 (Fan): 0.00 RPM (300.00/NA): [At or Below (<=) Lower Non- Recoverable Threshold] 21: Fan5 (Fan): 0.00 RPM (300.00/NA): [At or Below (<=) Lower Non- Recoverable Threshold] 22: Fan6 (Fan): 0.00 RPM (300.00/NA): [At or Below (<=) Lower Non- Recoverable Threshold] 23: Fan7/CPU3 (Fan): 4900.00 RPM (300.00/NA): [OK] 24: Fan8/CPU4 (Fan): 0.00 RPM (300.00/NA): [OK] 25: Fan9 (Fan): 0.00 RPM (300.00/NA): [OK] 26: Power Supply 1 (Power Supply): [Presence detected] 27: Power Supply 2 (Power Supply): [Presence detected] 28: Intrusion (Platform Chassis Intrusion): [General Chassis Intrusion] 29: CPU Internal Er (Module/Board): [OK] 30: CPU Overheat (Module/Board): [State Asserted] 31: Thermal Trip (Module/Board): [OK] Al > Thanks > Sharad Chandra -- Albert Chu [EMAIL PROTECTED] 925-422-5311 Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-devel mailing list Freeipmi-devel@gnu.org http://lists.gnu.org/mailman/listinfo/freeipmi-devel