At 04:29 PM 8/8/2001 +0200, Samuel Maftoul wrote:
>I want to athenticate users for logging on the nas (by telnet).
>Can I do this ? In my hint file I have no telnet or rlogin or whatever
>entries... just PPP , CSLIP , SLIP , PLIP and UUCP.
>I'm using cisco hardware.
First, you'll need to setup your Cisco to do authorization on EXEC. Start
by reading the following ( and further by searching google ):
http://www.cisco.com/warp/public/cc/pd/iosw/ioft/iolk/tech/rdius_wp.htm
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecur_c/fsaaa/scfathor.htm
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecur_r/faaacr/srfauth.htm
>I read the users man page and conffile ....
Auth is very basic on the radius side, the tricky part is configuring
the cisco properly.
Test with a system that isn't critical, as it is very possible to lock
yourself out of the NAS if you enter the wrong AAA configuration.
-Chris
--
\\\|||/// \ Chris Parker - Manager, Development Engineering
\ ~ ~ / \ WX *is* Wireless! \ [EMAIL PROTECTED]
| @ @ | \ http://www.starnetwx.net \ (847) 963-0116
oOo---(_)---oOo--\------------------------------------------------------
\ Without C we would have 'obol', 'basi', and 'pasal'
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
