> First, you'll need to setup your Cisco to do authorization on EXEC. Start
> by reading the following ( and further by searching google ):
>
> http://www.cisco.com/warp/public/cc/pd/iosw/ioft/iolk/tech/rdius_wp.htm
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecur_c/fsaaa/scfathor.htm
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecur_r/faaacr/srfauth.htm
Ok, thanks for these links .
>
> >I read the users man page and conffile ....
>
> Auth is very basic on the radius side, the tricky part is configuring
> the cisco properly.
Got it !
>
> Test with a system that isn't critical, as it is very possible to lock
> yourself out of the NAS if you enter the wrong AAA configuration.
I have tested on a spare one but already locked it (what should i do now ? reset ? )
:))
>
> -Chris
> --
> \\\|||/// \ Chris Parker - Manager, Development Engineering
> \ ~ ~ / \ WX *is* Wireless! \ [EMAIL PROTECTED]
> | @ @ | \ http://www.starnetwx.net \ (847) 963-0116
> oOo---(_)---oOo--\------------------------------------------------------
> \ Without C we would have 'obol', 'basi', and 'pasal'
Thanks for help,
Sam
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
