Freeradius version: 0.9.3 MySQL version: 3.23.49-8 Trying to apply two Cisco-AVPair attributes... ...one per user: Cisco-AVPair += ip:dns-servers=111.111.111.111 222.222.222.222 ...and one per group: Cisco-AVPair += ip:route=12.34.56.78 255.255.255.252 12.34.12.34
However, radtest shows that the "ip:dns-servers" line is sent, but the
"ip:route" line isn't. All other user and group level attributes appear
correctly.
I have searched the archives for this list and found the cause is
usually an incorrect operator ("==" or ":=" instead of "+="). I can
confirm however that the operator for both AV-Pair lines is set to "+=".
Any suggests as to what else could cause this?
Thanks in anticipation.
--
Kind regards
Greg Bolshaw
Consultant
Linux Technologies
http://www.linuxtechnologies.co.uk/
signature.asc
Description: This is a digitally signed message part
