Returning, we came up here and do not know where erroarea ..
rad_recv: Access-Request packet from host 127.0.0.1 port 58178, id=244,
length=115
Service-Type = Framed-User
Framed-Protocol = PPP
User-Name = "phlander"
CHAP-Challenge = 0x4ff1c005798fc649dd7acb1270f8d142d169b3e1f4
CHAP-Password = 0x14362cd1151241b3faf7b4826269ee9771
Calling-Station-Id = "00:42:15:11:24:57"
NAS-IP-Address = 10.0.0.1
NAS-Port = 0
WARNING: Empty authorize section. Using default return values.
ERROR: No authenticate method (Auth-Type) found for the request: Rejecting
the user
Failed to authenticate the user.
Delaying reject of request 0 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 0
Sending Access-Reject of id 244 to 127.0.0.1 port 58178
Waking up in 4.9 seconds.
Cleaning up request 0 ID 244 with timestamp +13
Ready to process requests.
----- Original Message -----
From: "Alan DeKok" <[email protected]>
To: "FreeRadius users mailing list" <[email protected]>
Sent: Monday, October 11, 2010 4:44 PM
Subject: Re: SQL query error; rejecting user
Daniel Sandulescu wrote:
I upgraded to version 2.1.10 and now I have this erroare:
The entire point of the debug output is to *read* it. You have the
same problem as last time.
And even worse, you "upgraded" to 2.1.10, and left all of the
problematic configuration files in place.
Instead, use the 2.1.10 configuration files, and then edit them. See
"man radiusd"
Alan DeKok.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
