Here it is installed :
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
And this is the error :
rad_recv: Access-Request packet from host 127.0.0.1 port 57115, id=255,
length=115
Service-Type = Framed-User
Framed-Protocol = PPP
User-Name = "phlander"
CHAP-Challenge = 0xf73651aeca5a7c950c9aa1bb7c2717b2c069a238e8
CHAP-Password = 0x73ebd7551d76b3caa221e5b64085a07b1d
Calling-Station-Id = "00:42:15:11:24:57"
NAS-IP-Address = 10.0.0.1
NAS-Port = 0
WARNING: Empty authorize section. Using default return values.
ERROR: No authenticate method (Auth-Type) found for the request: Rejecting
the user
Failed to authenticate the user.
Delaying reject of request 0 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 0
Sending Access-Reject of id 255 to 127.0.0.1 port 57115
Waking up in 4.9 seconds.
----- Original Message -----
From: "Alan Buxey" <[email protected]>
To: "FreeRadius users mailing list" <[email protected]>
Sent: Tuesday, October 12, 2010 11:20 AM
Subject: Re: SQL query error; rejecting user
Hi,
So I did, I deleted everything in / etc / raddb and I configuration,
again
depending on the requirements there.
check that the raddb directory is the right onw - I seem to recall that
one
of your logs showed it was /usr/local/etc/raddb/
the default configuration works for basic tests etc - it certainly doesnt
have the blank query error that you posted.
alan
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
