Suman,
As you did not say anything about the exact attributes, you will send to the NAC, here is how we do this: we are also using different NAS and have to reply with different VSAs for setting up the QOS. We use the "existence of a specific VSAs" (specified per NAS type) in the request to select the VSAs to be used in responses. e.g: if we found the Starent Networks VSA 'SN-Service-Type' in the request, we reply with 'SN-QOS-Profile' to set up QoS This is save, as we won't see any Starent VSAs in Cisco or Chillispot NASses. To make this flexible, we have set up our own VSA to configure users QOS, which is then translated into the specific reply attributes for the NAS, the user is currently using. Regards Stefan From: freeradius-users-bounces+a.freeradius=premit...@lists.freeradius.org [mailto:freeradius-users-bounces+a.freeradius=premit...@lists.freeradius.org ] On Behalf Of Suman Dash Sent: Saturday, October 08, 2011 4:40 PM To: FreeRadius users mailing list Subject: Dynamic Attributes Based on NAS Type ! Hi Everyone ... Currently i am planning to integrate freeradius with different NAS like Chillispot , Cisco etc and enable roaming users so that they can log in from any of the NAS. As the reply items are different with different NAS , i am looking for ideas how to enable a single user to roam and connect from different NAS. In my case i think static reply items are not possible per user wise or per groupwise so my question is what trick can be used to achieve the same. I had not tried anything as i have no clue on the same so some highlights on the approach will be a good starting point for me. Cheers Suman
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
