Norbert,
sorry, but you are taking a sledgehammer to crack the nut. If you read it one of the ideas of having different virtual servers is separation of policies for different NASses you are right. Suman was asking on how to send several NASses into the same policy. Regards Stefan From: freeradius-users-bounces+a.freeradius=premit...@lists.freeradius.org [mailto:freeradius-users-bounces+a.freeradius=premit...@lists.freeradius.org ] On Behalf Of Wegener, Norbert Sent: Saturday, October 08, 2011 8:02 PM To: FreeRadius users mailing list Subject: AW: Dynamic Attributes Based on NAS Type ! The general idea is to setup a virtual server for each type of NAS and make sure, that every NAS is loaded into the correct virtual server. With best regards, _____ Norbert Wegener Siemens IT Solutions and Services AIS MS NC PSU SDC Bruchstraße 5 45883 Gelsenkirchen, Germany Tel.: +49 (209) 94565716 Fax: +49 (201) 8165581284 mailto:norbert.wege...@atos.net Atos IT Solutions and Services GmbH; Geschäftsführung: Winfried Holz, Christian Oecking, Rainer-Christian Koppitz; Vorsitzender des Aufsichtsrats: Charles Dehelly; Sitz der Gesellschaft: München, Deutschland; Registergericht: München, HRB 184933. _____ Von: freeradius-users-bounces+norbert.wegener=atos....@lists.freeradius.org [freeradius-users-bounces+norbert.wegener=atos....@lists.freeradius.org]" im Auftrag von "Suman Dash [sumand...@gmail.com] Gesendet: Samstag, 8. Oktober 2011 16:39 Bis: FreeRadius users mailing list Betreff: Dynamic Attributes Based on NAS Type ! Hi Everyone ... Currently i am planning to integrate freeradius with different NAS like Chillispot , Cisco etc and enable roaming users so that they can log in from any of the NAS. As the reply items are different with different NAS , i am looking for ideas how to enable a single user to roam and connect from different NAS. In my case i think static reply items are not possible per user wise or per groupwise so my question is what trick can be used to achieve the same. I had not tried anything as i have no clue on the same so some highlights on the approach will be a good starting point for me. Cheers Suman
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
