Hi Alan, I am not blaming, I am just wanting to get the radwho command to work. I have now turned on accounting info to be sent from the StrongSwan server to the FreeRadius server. For I can see the accounting info in /var/log/radius/radacct/<IP_Address>/detail-20131003 file. However I am still getting the same results with the radwho command, showing just the titles, with no connections?
-----Original Message----- From: freeradius-users-bounces+cpetty=luthresearch....@lists.freeradius.org [mailto:freeradius-users-bounces+cpetty=luthresearch....@lists.freeradius.org] On Behalf Of Alan DeKok Sent: Thursday, October 03, 2013 10:53 AM To: FreeRadius users mailing list Subject: Re: radwho not working cpetty wrote: > Below is the results from radiusd -X (debug mode), while logging in: > > rad_recv: Access-Request packet from host xx.xx.xx.79 port 40379, id=79, > length=138 The radwho file logs *accounting* packets. That is an *authentication* packet. You're blaming FreeRADIUS because the NAS never sends an Accounting-Request. Go fix the NAS. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
