Hello Don, Good to see the initial problem has resolved itself for you.
Re when Serial PTT control is asserted by freedv-gui, on balance I'm OK with the current operation - ie PTT control is only assumed after Start is pressed. However I would be happy to hear other opinions - in particular anyone that is experiencing practical problems with the current design. Sure, if you want to modify the grayed out behaviour of the PTT Dialog check boxes as described below please feel free to raise a Github PR. I'm unclear on the change you are suggesting in the final two sentences. Perhaps it might be easier to post a PTT Dialog screen shot in the Github PR to illustrate what it might look like. Thanks, David On Sun, 2021-10-03 at 15:32 -0700, Don wrote: > Another related item. The dialog box has checkboxs for "DTR=+V" and > "RTS=+V". These can both be toggled whether "Use DTR" or "Use RTS" > is > selected. The two "Use" boxes are mutually exclusive, checking one > unchecks the other. > > But the code only sets the line being used. If only one line is > going to > be used, then the voltage checkbox for the other line should be > gray'd out > when not enabled. I would prefer to set the "inactive" level of both > lines. > This is how I have seen other programs handle these lines. > > Don > > > _______________________________________________ > Freetel-codec2 mailing list > Freetel-codec2@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 _______________________________________________ Freetel-codec2 mailing list Freetel-codec2@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freetel-codec2
