yup. I simply set the dxr3 driver for NTSC and ignore everything in the patch.
it works fine even with the PAL stuff in the patch. -----Original Message----- From: Rob Shortt [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 11:46 AM To: [EMAIL PROTECTED] Subject: [Freevo-users] dxr3 and libSDL Hi all, I have a dxr3 card that I am using in a Freevo box for a friend and have been working on the dxr3 patch for SDL. It looks like there are some PAL things hardcoded in the patch so I was wondering if there is anyone out there that is using NTSC and a dxr3 for Freevo. Thanks, Rob ------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users ------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
