If you are going to use overscan, then the interface should be designed to take into account the TV Safe area.
I think there needs to be overscan specific version. ----- Original Message ----- From: "Gray, Tim" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, January 16, 2004 1:39 PM Subject: RE: [Freevo-users] dxr3 and libSDL > yes I have, and I also need to make the GUI image smaller somehow. > > overscan settings will not take negative numbers so those are useless (I > want a -20 setting!) > > I am using the runtime + 1.4 (1.4.1 has a bug that will not let it run > outside the home directory) on a slackware 9.1 install. > > so yes it works, except that the freevo GUI is overscanning too far. > > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Barnowl > Sent: Tuesday, January 13, 2004 11:54 PM > To: [EMAIL PROTECTED] > Subject: Re: [Freevo-users] dxr3 and libSDL > > > Tim- > Have you got Xine working freevo on your dxr3? Mine keeps quitely failing > in freevo though it works if I run it in X, fbxine fails on the console with > dxr3. Also did you figure out how to adjust the scan setting on the dxr3? I > need to make the image smaller to fit on the screen. > > Evan > > > On Tue, 13 Jan 2004 11:58:12 -0500 > "Gray, Tim" <[EMAIL PROTECTED]> wrote: > > > I sure can, the freevo machine I have that on is at home so I'll email you > > with that info ASAP. > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Rob Shortt > > Sent: Tuesday, January 13, 2004 11:56 AM > > To: [EMAIL PROTECTED] > > Subject: Re: [Freevo-users] dxr3 and libSDL > > > > > > Gray, Tim wrote: > > > yup. I simply set the dxr3 driver for NTSC and ignore everything in the > > > patch. > > > > > > it works fine even with the PAL stuff in the patch. > > > > That's good to hear. Last night I did some work porting the patch to > > SDL12 cvs and last ffmpeg release (0.4.8). I had to change a few things > > to get it to build but haven't had a chance to test it. > > > > Tim, in order to save me some time can you tell me how your dxr3 modules > > are configured? Modprobe options and such. > > > > Thanks! > > -Rob > > > > > > > > -----Original Message----- > > > From: Rob Shortt [mailto:[EMAIL PROTECTED] > > > Sent: Tuesday, January 13, 2004 11:46 AM > > > To: [EMAIL PROTECTED] > > > Subject: [Freevo-users] dxr3 and libSDL > > > > > > > > > > > > Hi all, > > > > > > I have a dxr3 card that I am using in a Freevo box for a friend and have > > > > been working on the dxr3 patch for SDL. It looks like there are some > > > PAL things hardcoded in the patch so I was wondering if there is anyone > > > out there that is using NTSC and a dxr3 for Freevo. > > > > > > Thanks, > > > Rob > > > > > > > > > > > > ------------------------------------------------------- > > > This SF.net email is sponsored by: Perforce Software. > > > Perforce is the Fast Software Configuration Management System offering > > > advanced branching capabilities and atomic changes on 50+ platforms. > > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > > _______________________________________________ > > > Freevo-users mailing list > > > [EMAIL PROTECTED] > > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > > > > > ------------------------------------------------------- > > > This SF.net email is sponsored by: Perforce Software. > > > Perforce is the Fast Software Configuration Management System offering > > > advanced branching capabilities and atomic changes on 50+ platforms. > > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > > _______________________________________________ > > > Freevo-users mailing list > > > [EMAIL PROTECTED] > > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > > > > > > ------------------------------------------------------- > > This SF.net email is sponsored by: Perforce Software. > > Perforce is the Fast Software Configuration Management System offering > > advanced branching capabilities and atomic changes on 50+ platforms. > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > _______________________________________________ > > Freevo-users mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > > ------------------------------------------------------- > > This SF.net email is sponsored by: Perforce Software. > > Perforce is the Fast Software Configuration Management System offering > > advanced branching capabilities and atomic changes on 50+ platforms. > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > _______________________________________________ > > Freevo-users mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > ------------------------------------------------------- > The SF.Net email is sponsored by EclipseCon 2004 > Premiere Conference on Open Tools Development and Integration > See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. > http://www.eclipsecon.org/osdn > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > ------------------------------------------------------- > The SF.Net email is sponsored by EclipseCon 2004 > Premiere Conference on Open Tools Development and Integration > See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. > http://www.eclipsecon.org/osdn > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
