Stephen Rowles wrote: >>> * TV guide is really slow to load :( - would be better if the "timer" >>> picture was displayed, but spends ages seemingly doing nothing, any >>> controls pressed are cached during this time so you can end up watching >>> TV rather than viewing the guide! This is a particular problem when >>> people use the system for the first time. (note 10 days TV guide for >>> around 20 channels) >>> >>> >>> >> Not sure what's happening here, I have 10 days worth of info for 19 >> channels and my guide takes about 2.5 seconds to load on an 1.2Ghz >> athlon and a 7200rpm drive. My TV.xml is 2.6M >> >> > My machine is very "wife friendly" so is a small quiet via EPIA box, > 1.2ghz, 7200 rpm drive. my TV.xml is around 4meg. The problem is more > the first time it is loaded after each update which takes ages. I'm not > in front of my machine now but will try and get some accurate timings. > The delay is certainly enough to cause problems. > Just an update on this for the record, will update again after trying Duncan's cElementTree suggestion.
Processing my guide for the first time after an update, again with 4meg takes 27 seconds. Displaying the TV guide after the initial processing is complete takes a further 7 seconds. This means that when selecting the guide I have to wait 7 seconds with nothing happening and no "timer" prompt before the guide is displayed. 7 seconds in a user interface wait without feedback is long time ;) ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Freevo-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freevo-users
