Well a quick trial shows that the VS is actually being restarted, it's just
the web page that's hanging.
I put a file in /tmp (that's cleared upon VS restarted), clicked Reboot VS
from the web page and the file was killed (as was the terminal I was in on
the VS.)
Hmmm...the plot thickens!
----
Ben Kennish
email | [EMAIL PROTECTED]
----- Original Message -----
From: "Bill Brigden" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, April 19, 2001 4:42 PM
Subject: Re: VSDWebAdmin on Host server?
> With running daemons on the host server.. you must make sure that anything
> that you run binds to the host IP (except for sendmail - that runs through
> xinetd/inet), and everything will be fine and dandy. (with apache running
on
> port 80)
> With the reboot problem, the html in the file points to the wrong
dir...take
> a look and you can fix it easily. The actual reboot button send the
> reboot_vs command to the vsdadm daemon, but i cant see why it is not
> working - any ideas Tim, etc?
>
> Thanks Bill.
>
> ----- Original Message -----
> From: "Ben Kennish" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, April 19, 2001 4:36 PM
> Subject: Re: VSDWebAdmin on Host server?
>
>
> > Whoopie! You're right.
> >
> > Apart from the restart problem mentionned earlier by Bill, its working
> like
> > a champ.
> >
> > The image next to the reboot VS button seems to be broken too. Is this
> > reboot issue a known issue? Is it caused by the increased time delay
when
> > running "rebootvs" in the new version of freeVSD?
> >
> > Cheers,
> >
> > ----
> > Ben Kennish
> > email | benfubra.net
> >
> > ----- Original Message -----
> > From: "Pau Marshall" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Thursday, April 19, 2001 3:41 PM
> > Subject: Re: VSDWebAdmin on Host server?
> >
> >
> > > Hi,
> > >
> > > At 05:50 AM 4/19/01, you wrote:
> > > >I've just realised a problem. In order to get VSDWebAdmin up and
> running
> > on
> > > >the host server, it needs Apache and MySQL running. However, running
> > these
> > > >on the host server will break all these daemons on the VSes!
> > >
> > > That is not always the case, but the problems has to do with the
ports.
> If
> > > you're using the port redirection, you won't be able to run Apache on
> port
> > 80.
> > >
> > > I installed VSDWebAdmin into a VS and it works fine.
> > >
> > > Take care,
> > >
> > > Paul
> > >
> > >
> > >
> > > >What is the workaround for this (couldn't find anything in the
readme.)
> > Or
> > > >are we gonna have to host the WebAdmin on a different server (not
ideal
> > for
> > > >our circumstances!)
> > > >
> > > >Cheers,
> > > >
> > > >
> > > >----
> > > >Ben Kennish
> > > >
> > > >Software Engineer
> > > >Fubra Limited
> > > >
> > > >web | www.fubra.net
> > > >email | [EMAIL PROTECTED]
> > > >phone | +44 (0)870 1222 600
> > > >fax | +44 (0)870 1222 699
> > >
>
