I know on the older Duplo Slitters you could manually program in a job but this would be about 5 -6 years ago since I operated one. Are you using the barcode reader for a prebuilt program? Or are you measuring out each cut and cross cut manually?
On 3/11/08 2:11 PM, "David Young" <[EMAIL PROTECTED]> wrote: > I have a 2 sided business card with bleed. Our Duplo slitter requires > that we start the card 10mm from the edge to work in the machine. > I can make the imposition offset correctly but when the indigo backs up > the offset edge is on the opposite side. I have tried all combinations > in FP Imposer but it always moves to the opposite side. > Any Ideas? +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- FusionPro 5.0 Now Available! Variable text on a curve and soft drop-shadows for variable text LIMITED TIME upgrade offer of $299 per license for current customers: http://fusionpro.printable.com/store/upgrade New licenses available for $599 each at: http://fusionpro.printable.com/store/ All FusionPro 5.0 customers to receive FusionPro 5.1 with Adobe Acrobat 8 and InDesign CS3 support when released for FREE. +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
