Have you tried adjusting the gutters to expand it to the 10 mm requirement? It has to stay in the middle so it will back up. Thanks Dawn McAtee Wheeler Ideal Printers, Inc. 713-880-8800 Fax 713-880-8875
> > I have a 2 sided business card with bleed. Our Duplo slitter requires > that we start the card 10mm from the edge to work in the machine. > I can make the imposition offset correctly but when the indigo backs up > the offset edge is on the opposite side. I have tried all combinations > in FP Imposer but it always moves to the opposite side. > Any Ideas? +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- FusionPro 5.0 Now Available! Variable text on a curve and soft drop-shadows for variable text LIMITED TIME upgrade offer of $299 per license for current customers: http://fusionpro.printable.com/store/upgrade New licenses available for $599 each at: http://fusionpro.printable.com/store/ All FusionPro 5.0 customers to receive FusionPro 5.1 with Adobe Acrobat 8 and InDesign CS3 support when released for FREE. +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
