Dawn,
For static work like this I use Preps and it backs up correctly
David L. Young
Spectrum Printing LLC
4651 S Butterfield Dr
Suite 161
Tucson, AZ 85714
Phone 520 571 1114
Fax 520 571 1395
Dawn Wheeler wrote:
Have you tried adjusting the gutters to expand it to the 10 mm requirement?
It has to stay in the middle so it will back up.
Thanks
Dawn McAtee Wheeler
Ideal Printers, Inc.
713-880-8800
Fax 713-880-8875
I have a 2 sided business card with bleed. Our Duplo slitter requires
that we start the card 10mm from the edge to work in the machine.
I can make the imposition offset correctly but when the indigo backs up
the offset edge is on the opposite side. I have tried all combinations
in FP Imposer but it always moves to the opposite side.
Any Ideas?
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
FusionPro 5.0 Now Available!
Variable text on a curve and soft drop-shadows for variable text
LIMITED TIME upgrade offer of $299 per license for current customers:
http://fusionpro.printable.com/store/upgrade
New licenses available for $599 each at:
http://fusionpro.printable.com/store/
All FusionPro 5.0 customers to receive FusionPro 5.1 with
Adobe Acrobat 8 and InDesign CS3 support when released for FREE.
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
--
Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED]
--
View FusionPro Knowledge Base, FusionPro Samples at
www.printable.com/vdp/desktop.htm
--
You are currently subscribed to fusionpro as: [EMAIL PROTECTED]
To unsubscribe send a blank email to [EMAIL PROTECTED]
--
--
Note: All e-mail sent to or from this address will be received or otherwise
recorded by the e-mail recipients of this forum. It is subject to archival,
monitoring or review by, and/or disclosure to someone other than the recipient.
Our privacy policy is posted on www.printplanet.com
--
