Dan
The Duplo isn't the problem, I have a prebuilt program for the cards.
Just can't get FP Imposer to backup correctly
David L. Young
Spectrum Printing LLC
4651 S Butterfield Dr
Suite 161
Tucson, AZ 85714
Phone 520 571 1114
Fax 520 571 1395
Dan Kelshaw wrote:
I know on the older Duplo Slitters you could manually program in a job but
this would be about 5 -6 years ago since I operated one. Are you using the
barcode reader for a prebuilt program? Or are you measuring out each cut and
cross cut manually?
On 3/11/08 2:11 PM, "David Young" <[EMAIL PROTECTED]> wrote:
I have a 2 sided business card with bleed. Our Duplo slitter requires
that we start the card 10mm from the edge to work in the machine.
I can make the imposition offset correctly but when the indigo backs up
the offset edge is on the opposite side. I have tried all combinations
in FP Imposer but it always moves to the opposite side.
Any Ideas?
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
FusionPro 5.0 Now Available!
Variable text on a curve and soft drop-shadows for variable text
LIMITED TIME upgrade offer of $299 per license for current customers:
http://fusionpro.printable.com/store/upgrade
New licenses available for $599 each at:
http://fusionpro.printable.com/store/
All FusionPro 5.0 customers to receive FusionPro 5.1 with
Adobe Acrobat 8 and InDesign CS3 support when released for FREE.
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
--
Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED]
--
View FusionPro Knowledge Base, FusionPro Samples at
www.printable.com/vdp/desktop.htm
--
You are currently subscribed to fusionpro as: [EMAIL PROTECTED]
To unsubscribe send a blank email to [EMAIL PROTECTED]
--
--
Note: All e-mail sent to or from this address will be received or otherwise
recorded by the e-mail recipients of this forum. It is subject to archival,
monitoring or review by, and/or disclosure to someone other than the recipient.
Our privacy policy is posted on www.printplanet.com
--
