try setting the stack count in the first colum then horizontal second and vertical third
----- Original Message ---- From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> To: FusionPro Users Forum <[email protected]> Sent: Thursday, March 22, 2007 5:19:34 PM Subject: [fusionpro] RE: FP Imposer issues since conversion to 4.1 For one specific example, I have 5086 records so I divide by 8 and round up to 636 for my stack count in the first column, set my vertical to 4 in the second column, and my horizontal to 2 in the third column. The image depicts correctly that record 1, 637, 1273 etc will be printed on the first sheet. At composition, the stack setting is disregarded and only the vert and horiz are used. -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com -- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [email protected] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
