No, it is behind a static NAT with it's own IP
> -----Original Message-----
> From: Ken McNicholas [mailto:[EMAIL PROTECTED]]
> Sent: Monday, May 22, 2000 11:34 AM
> To: 'Brendan McCauley'; 'Steven Nurse';
> '[EMAIL PROTECTED]'
> Subject: RE: [FW1] PPTP
>
>
> Is the pptp server the FW as well?
> -----Original Message-----
> From: Brendan McCauley [mailto:[EMAIL PROTECTED]]
> Sent: Monday, May 22, 2000 11:54 AM
> To: 'Steven Nurse'; Brendan McCauley;
> '[EMAIL PROTECTED]'
> Subject: RE: [FW1] PPTP
>
>
> I am trying to make a pptp client talk to a pptp server on
> the internet. I
> installed the latest NT sp (6a) last week and haven't had a
> chance to try it
> since, but had no luck until then.
> My configuration:
>
> NTWS(pptp client)->Fw1(Internet)->pptp server
>
> everything I've read (except phoneboy's site) has said that
> this will not
> work with 3.x-4.1.
>
> when I try to connect I get the standard 'cannot connect to
> server' error on
> the ws and see two log entries for the control connection and
> then a gre (ip
> 47) entry using port 38xxx. There is no response from the
> server in the log
> and I don't have a way to sniff for one right now (although I
> have a hunch,
> it would still not show a response).
>
>
> Brendan
>
> > -----Original Message-----
> > From: Steven Nurse [mailto:[EMAIL PROTECTED]]
> > Sent: Thursday, May 18, 2000 6:06 PM
> > To: Brendan McCauley; '[EMAIL PROTECTED]'
> > Subject: RE: [FW1] PPTP
> >
> >
> > Brendan,
> >
> > I have pptp working through Firewall-1 V4.0 on a NT
> box as well
> > as V4.1. It took a little time but it works 100%. Let me
> know if you
> > need a hand.
> >
> > I only allow PPTP protocol going into one of my
> servers nothing
> > else. This hopefully limits the possibility of hacks.
> >
> > Steve
> >
> >
> >
> > -----Original Message-----
> > From: Brendan McCauley [mailto:[EMAIL PROTECTED]]
> > Sent: Thursday, 18 May 2000 12:17 AM
> > To: '[EMAIL PROTECTED]'
> > Subject: [FW1] PPTP
> >
> >
> >
> > Please excuse me if there has been a recent thread about
> this issue, I
> > haven't been on the list for about three weeks now.
> >
> > I've found documents on both checkpoint and phoneboy's sites about
> > configuring PPTP. The doc on checkpoints site says PPTP won't work
> > period
> > through the firewall with versions 3.x-4.0. Phoneboys site
> > has a little
> > different configuration but also says nothing about what versions it
> > will
> > work with.
> > Anyone got PPTP working with these version?
> > Anyone got a better solution than sticking the PPTP interface
> > out on the
> > external segment?
> >
> >
> > ==============================================================
> > ==========
> > ========
> > To unsubscribe from this mailing list, please see the
> > instructions
> > at
> > http://www.checkpoint.com/services/mailing.html
> > ==============================================================
> > ==========
> > ========
> >
>
>
> ==============================================================
> ==============
> ====
> To unsubscribe from this mailing list, please see the
> instructions at
> http://www.checkpoint.com/services/mailing.html
> ==============================================================
> ==============
> ====
>
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
