Is your PPTP machine a client or a server?
Are you running PPTP on the firewall?
Is your PPTP machine behind a firewall or on an external segment?
Is your PPTP counterpart (client or server) behind a firewall or on an
external segment?
If yes to either of the two above what kind of NAT?
What do your log entries look like?
Was there any problems relative to PPTP servers talking to clients behind a
static NAT?
my config:
PPTP Client->FW1->Internet->PPTP Server
I have a static NAT set up for this specific machine. I see two log entires
evey time I try to connect.
accept PPTP-control My_pptp_client PPTP-Server gre
accept 34827 My_pptp_client PPTP-Server gre
(it says gre instead of 47 because I added gre to the services file in
sysroot/drivers/etc/ folder)
> -----Original Message-----
> From: Miles, David [mailto:[EMAIL PROTECTED]]
> Sent: Monday, May 22, 2000 11:47 AM
> To: 'Brendan McCauley'; 'Steven Nurse';
> '[EMAIL PROTECTED]'
> Subject: RE: [FW1] PPTP
>
>
> It works fine with 3.x and 4.x. I am currently running PPTP on 4.x.
> Started out on a 3.x box and upgraded to 4.x with no
> problems. Works 100%
> of the time. Never have any problems.
>
>
>
> -----Original Message-----
> From: Brendan McCauley [mailto:[EMAIL PROTECTED]]
> Sent: Monday, May 22, 2000 11:54 AM
> To: 'Steven Nurse'; Brendan McCauley;
> '[EMAIL PROTECTED]'
> Subject: RE: [FW1] PPTP
>
>
>
> I am trying to make a pptp client talk to a pptp server on
> the internet. I
> installed the latest NT sp (6a) last week and haven't had a
> chance to try it
> since, but had no luck until then.
> My configuration:
>
> NTWS(pptp client)->Fw1(Internet)->pptp server
>
> everything I've read (except phoneboy's site) has said that
> this will not
> work with 3.x-4.1.
>
> when I try to connect I get the standard 'cannot connect to
> server' error on
> the ws and see two log entries for the control connection and
> then a gre (ip
> 47) entry using port 38xxx. There is no response from the
> server in the log
> and I don't have a way to sniff for one right now (although I
> have a hunch,
> it would still not show a response).
>
>
> Brendan
>
> > -----Original Message-----
> > From: Steven Nurse [mailto:[EMAIL PROTECTED]]
> > Sent: Thursday, May 18, 2000 6:06 PM
> > To: Brendan McCauley; '[EMAIL PROTECTED]'
> > Subject: RE: [FW1] PPTP
> >
> >
> > Brendan,
> >
> > I have pptp working through Firewall-1 V4.0 on a NT box as well
> > as V4.1. It took a little time but it works 100%. Let me
> know if you
> > need a hand.
> >
> > I only allow PPTP protocol going into one of my servers nothing
> > else. This hopefully limits the possibility of hacks.
> >
> > Steve
> >
> >
> >
> > -----Original Message-----
> > From: Brendan McCauley [mailto:[EMAIL PROTECTED]]
> > Sent: Thursday, 18 May 2000 12:17 AM
> > To: '[EMAIL PROTECTED]'
> > Subject: [FW1] PPTP
> >
> >
> >
> > Please excuse me if there has been a recent thread about
> this issue, I
> > haven't been on the list for about three weeks now.
> >
> > I've found documents on both checkpoint and phoneboy's sites about
> > configuring PPTP. The doc on checkpoints site says PPTP won't work
> > period
> > through the firewall with versions 3.x-4.0. Phoneboys site
> > has a little
> > different configuration but also says nothing about what versions it
> > will
> > work with.
> > Anyone got PPTP working with these version?
> > Anyone got a better solution than sticking the PPTP interface
> > out on the
> > external segment?
> >
> >
> > ==============================================================
> > ==========
> > ========
> > To unsubscribe from this mailing list, please see the
> > instructions
> > at
> > http://www.checkpoint.com/services/mailing.html
> > ==============================================================
> > ==========
> > ========
> >
>
>
> ==============================================================
> ==============
> ====
> To unsubscribe from this mailing list, please see the
> instructions at
> http://www.checkpoint.com/services/mailing.html
> ==============================================================
> ==============
> ====
>
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
