Hello,
I have had success with the 3rd NIC finally..... There were 2 things
wrong...
Initially I had given my new NIC an IP from a subnet that the other internal
NIC had... Bad idea.. firewall stops routing... Gets confused....
Secondly... The new NIC's driver didn't install properly... Perhaps I
didn't stop the FW service when trying to install it...
Anyway, I:
stopped the FW service... uninstalled the NIC driver... rebooted....
stopped the fw service.... installed the drvier again... rebooted.... it
showed up in route print... everything works now from the looks of it...
No more errors in ipconfig /all
Thanks again for your comments...
David
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Mike
Glassman - Admin
Sent: Monday, June 05, 2000 1:38 AM
To: 'fw-1 listserv'
Subject: RE: [FW1] FW: 3rd NIC card problem
As well as this, I would try reinstalling the last SP that you have
installed on the NT.
We had a similar issue which that fixed.
Altho I agree with Sunny, it does sound more like a HW problem, but it's
worth a shot.
Mike
> -----Original Message-----
> From: Sunny Kwan [SMTP:[EMAIL PROTECTED]]
> Sent: a ea?e 05 2000 4:15
> To: davidxs
> Cc: Fw-1-Mailinglist
> Subject: RE: [FW1] FW: 3rd NIC card problem
>
>
> David,
>
> If you have the error with ipconfig /all, you may have hardware problem or
> your NIC driver is not for that NIC card. Try to check the "bind" tab in
> the
> "Network" icon of "Control Panel", see if you NIC card is binding the
> TCP/IP
> service properly.
>
> Sunny Kwan
> Infrastructure Manager, renren.com
> Home for the global Chinese family -
> http://www.renren.com
>
> -----Original Message-----
> From: davidxs [mailto:[EMAIL PROTECTED]]
> Sent: Sunday, June 04, 2000 12:43 AM
> To: [EMAIL PROTECTED]
> Cc: Fw-1-Mailinglist
> Subject: RE: [FW1] FW: 3rd NIC card problem
>
>
> Chad..
>
> Thanks for the reply..
>
> I guess I didn't present the information clearly... Let me attempt it
> again.. :-)
>
> interface Ip meaning something like this in route print
>
> 10.1.1.150 255.255.255.255 127.0.0.1
>
> route print doesn't show the new NIC, where the other NICs show up with
> all
> the other IP address assigned to them... for example
>
> 10.1.2.150 255.255.255.255 127.0.0.1
> 10.1.3.150 255.255.255.255 127.0.0.1
> 10.1.4.150 255.255.255.255 127.0.0.1
>
> I was told that because the interface isn't showing up in print route.. NT
> isn't detecting the NIC properly.. I also get errors with ipconfig /all,
> so
> there is another issue as well....
>
> David
>
>
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Friday, June 02, 2000 3:32 PM
> To: davidxs
> Subject: Re: [FW1] FW: 3rd NIC card problem
>
>
> David,
>
> Sorry to jump into this thread so late, but the statement from below
> "(interface IP (new NIC) 127.0.0.1)", thats not the ip address is it??
>
> Chad Graham
> CDI Engineering
>
> davidxs wrote:
>
> > Hello All,
> >
> > Thanks for all of the replies regarding adding additional NICs to a FW
> box.
> > Unfortantly I haven't been able to get it to work yet... The new
> interface
> > fails to show up in "route print" in NT meaning NT isn't recognizing the
> new
> > NIC. (interface IP (new NIC) 127.0.0.1)
> >
> > All NICs have seperate subnets assigned to them so I know that isn't a
> > problem, and traffic flows normally through the other main internal and
> > external NICs just fine. I was hoping that adding the NIC wouldn't be as
> > intrusive as reinstalling FW-1, but it looks like that is the course to
> > take...
> >
> > What eddy lists below in backing up directories... Is that all?? I have
> seen
> > other posts saying to back up more... Is there anything in a directory,
> when
> > put back after reinstall that would effect the new install negatively in
> the
> > sense that a new NIC is now in place...The posts below states that all
> *.W,
> > *.pf, *.C, and rulebases.fws should be copied and the same SP be in
> place
> > when building a new firewall with the same rules, etc...
> >
> > Is there any real difference between building a new firewall to take
> > another's configuration and re-installing fw-1 on a box after adding a
> new
> > NIC in terms of what is need to be copied in the fw directory after
> install?
> >
> > David
> >
> > Previous Posts on FW migrations ---------------------------
> >
> > Make sure the FW's are at the same level and the same SP before you try
> this
> > or you'll have issues.
> >
> > Mike
> >
> > > -----Original Message-----
> > > From: James Otts [SMTP:[EMAIL PROTECTED]]
> > > Sent: a iae 30 2000 23:35
> > > To: Troy Fontenot
> > > Cc: [EMAIL PROTECTED]
> > > Subject: RE: [FW1] Copying a rule base from one firewall to
> another
> > >
> > >
> > > Yup... I believe you just need *.W, *.pf, *.C, and rulebases.fws
> > >
> > > James
> > >
> > > > -----Original Message-----
> > > > From: Troy Fontenot
> [mailto:[EMAIL PROTECTED]]
> > > > Sent: Tuesday, May 30, 2000 4:31 PM
> > > > To: [EMAIL PROTECTED]
> > > > Subject: [FW1] Copying a rule base from one firewall to another
> > > >
> > > > Is it possible to copy a rule base and the objects from one firewall
> to
> > > > another if they are both running at the same version and service
> pack
> > > > level? If so, which files do I need to copy?
> > > >
> > > >
> > > > Troy Fontenot
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of Eddy
> > Chien
> > Sent: Thursday, June 01, 2000 1:12 PM
> > To: [EMAIL PROTECTED]
> > Cc: [EMAIL PROTECTED]
> > Subject: RE: [FW1] FW: 3rd NIC card problem
> >
> > Hi Sunny,
> >
> > Did you re-install FW-1 after adding the new network card? Because FW-1
> > needs to put inspect module between protocol stack and NIC driver. You
> will
> > need to re-install FW-1 after making any changes to the network card.
> >
> > The proper procedure for adding / removing network card or even applying
> > service pack is:
> > 1. Backup your fw configuration: basically the winnt\fw\conf and
> > winnt\fw\state directories.
> > 2. Make what ever changes you need.
> > 3. Re-install Fw-1.
> > 4. Copy the two directories mentioned above back.
> >
> > Hope this helps
> >
> > eddy chien
> >
> > >From: Sunny Kwan <[EMAIL PROTECTED]>
> > >To: [EMAIL PROTECTED]
> > >CC: [EMAIL PROTECTED]
> > >Subject: RE: [FW1] FW: 3rd NIC card problem
> > >Date: Thu, 1 Jun 2000 19:26:40 +0800
> > >
> > >No, I don't mean that. What I mean is: there should be only one default
> > >gateway for the NT server itself. Take for example:
> > >NIC 1 - ip 10.1.1.1 mask 255.255.255.0 (no default gateway)
> > >NIC 2 - ip 192.168.1.1 mask 255.255.255.0 (no default gateway)
> > >NIC 3 - ip 207.133.4.50 mask 255.255.255.0 default gateway
> 207.133.4.254
> > >(your router)
> > >So the whole server have only one default gateway then it can find way
> out.
> > >
> > >Sunny Kwan
> > >Infrastructure Manager, renren.com
> > >Home for the global Chinese family -
> > >http://www.renren.com <http://www.renren.com/>
> > >
> > >-----Original Message-----
> > >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> > >Sent: Thursday, June 01, 2000 7:08 PM
> > >To: Sunny Kwan
> > >Subject: RE: [FW1] FW: 3rd NIC card problem
> > >
> > >
> > >Let me see if I understand this: the new NIC has an address on the
> same
> > >subnet as one of the existing cards? If so - how do you expect NT to
> make
> > >routing decisions to use the card? To my knowledge, it is impossible
> for
> > >NT
> > >to act as a bridge.
> > >
> > > -----Original Message-----
> > >From: davidxs [mailto:[EMAIL PROTECTED]]
> > >Sent: Thursday, June 01, 2000 12:06 AM
> > >To: Fw-1-Mailinglist
> > >Subject: [FW1] FW: 3rd NIC card problem
> > >
> > >
> > >Hello All,
> > >
> > >I am trying to put a 3rd NIC into my FW 4.0 without success. After
> > >installing the driver for the NIC sucessfully for NT, the FW will not
> allow
> > >traffic through its external interface. I have tried adding the the new
> > >interface to the FW object without sucess as well. The new card has an
> IP
> > >address of the the same class C internally but obviously a different
> > >specific IP from other the internal NIC.
> >
> > ________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
> >
> >
> ==========================================================================
> ==
> > ====
> > To unsubscribe from this mailing list, please see the instructions
> at
> > http://www.checkpoint.com/services/mailing.html
> >
> ==========================================================================
> ==
> > ====
> >
> >
> ==========================================================================
> ==
> ====
> > To unsubscribe from this mailing list, please see the instructions
> at
> > http://www.checkpoint.com/services/mailing.html
> >
> ==========================================================================
> ==
> ====
>
>
>
>
> ==========================================================================
> ==
> ====
> To unsubscribe from this mailing list, please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> ==========================================================================
> ==
> ====
>
>
> ==========================================================================
> ======
> To unsubscribe from this mailing list, please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> ==========================================================================
> ======
============================================================================
====
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
============================================================================
====
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
