> These instructions do NOT overclock your Mac. All these instructions do is > change the CPU speed information so that the "About this Mac" and System > Profiler will read 533 MHz rather than the REAL speed, which is STILL THE > SAME AS BEFORE. > > In order to truly overclock any G3 series Mac you MUST do this in hardware by > changing physical jumpers. There is NO software overclock for G3 series Macs > AFAIK.
This DOES work, and it proves that this is so in one simple way. If reset the PRAM, it still says 533 MHz. If you try that with the speed-changing commands, it resets itself on every PRAM wipe. -- You received this message because you are a member of G-Books, a group for those using G3 iBooks and PowerBooks (we run a separate list for G4 'Books). The list FAQ is at http://lowendmac.com/lists/g-books.html and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g-books Support for older Macs: http://lowendmac.com/services/
