Re: USB 2.0 to IDE 2.5" HDD enclosure trouble

[Jim]

Brent, is it possible that the drive is just not getting enough power 
through the USB bus?  Perhaps you've got some other things on the same 
bus that are sharing power?  If there is a way to externally supply 
power to the enclosure, that may help matters.

--Jim.

Brent Baeslack <[EMAIL PROTECTED]> wrote:
I upgraded the hard drive in my G3 Firewire (Pismo) 400 MHz 320MB RAM
so I removed the Fujitsu MRH2010AT 10 GB no jumpers Device 0.  So I
thought the smart thing to do would be to get a USB drive enclose
(USAP usb 2.0 mac/pc) and use it for backup or storage.
My problem is that once I connect the enclosure to my desktop G4
Quicksilver it mounts OK but as soon as I attempt to copy anything to
the drive it hangs (freezes finder).


--
G-Books is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
-- Check our web site for refurbished PowerBooks  |  & CDRWs on Sale!  |
     Support Low End Mac <http://lowendmac.com/lists/support.html>

G-Books list info:      <http://lowendmac.com/lists/g-books.html>
 --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/>


---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------