Hi All; My G3 266DT has a double ended cable on the CD and a single ended cable on the HDD. IIRC the HDD is on ATA bus 0 and the CD is on ATA bus 1. Am I correct on this? Are these cables interchangeable between the buses? I think I read somewhere that the ATA bus 0 is the faster of the two and if I were to install a HDD on ATA bus 1, I should make the CD the slave, as the CD should be set to master only if it's the only drive on a bus. Am I correct on this also? I have another smaller HDD I want to install to use for storage of things I need from time to time and can't remember where the CD's are. (My wife says I'm getting old. hehe) If these cables will interchange, it'll save me haveing to buy another cable right now. This G3 is an entirely different beast compared to the 3 Quadra 630 form factor Macs I also own, 2 6360's and a 6230. Any and all replies appreciated. TIA --Thanks; Rev. George --Maranatha (means the Lord cometh)
-- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Macintosh? Get free email and more at Applelinks! <http://www.applelinks.com>
