1st I installed a Sonnet Tempo ATA 133 card into a B&W G3 rev 1 Then I installed a 60 Gig HD. There is room for 3 side-by-side HDs in this computer. I left the original 6 gig HD in (counting 1-3 from the top down when it's closed) the 3rd bay. I left the middle bay empty and put the new one in position 1. Obviously the new drive was connected to the ATA 133.
I had a NVIAN extension which had to be turned off to boot up. But then everything seemed to work okay and I opened Disk Set Up to initialize and partition the new HD. The ATA is recognized in what is identified as a SCSI bus. I assume it's problem and did not proceed. Does anyone know what I have done wrong? Flanzy Chodkowski NEXT TIME START YOUR SEARCH AT OUR WEB SITE AND SAVE 20% http://www.monroestreetbooks.com Monroe Street Books (Dick & Flanzy Chodkowski) 70 Monroe Street, Middlebury, Vermont 05753-1534 ph: 802-388-1622 fax 802-388-1608 -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
