Thanks to all for the great suggestions. Tony, when I call for a startup page, it doesn't show any addresses. The configuration page shows the Ethernet address and the LocalTalk Node ID, but nothing for TCP/IP. BTW, if you don't want to waste a sheet on every printer startup, good old LaserWriter Utility gives you the option of on or off for Startup Page.
Nancy, I read the Asante IP address (which is the default) and tried to use that for the printer, with no luck--but I did not consider restart. Thanks for the tip! And I guess I better find or download the Asante manual :--) BTW, I haven't had problems printing complex pages, except for slowness, but I did max the printer RAM at 32 MB years ago. You probably know your 16/600 also has two RAM slots, and can go up to 32 MB, 72-pin, 80 ns or faster, like 70 ns. (See Note 12 at http://docs.info.apple.com/article.html?artnum=9968 or page 150 of the old Apple Memory Guide) If you haven't upgraded, you waste the existing 8 MB module so you can install two 16 MB ones. If you can find them and if it is worth it to you, from $3 to maybe $14 per 16 MB, shop around. Just a thought. Steve in Raleigh -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
