I believe you stated the CPU you installed was a 266 MHz from a Beige G3. Set your bus speed to 66MHz and the CPU to 266MHz. Don't over clock it and re-try. It is possible the overcloced CPU is giving you greif. When you have any problem, whether it appears to be CPU related or not, always back off your overclocking.
Visit http://www.xlr8yourmac.com for details on how to set the FSB of your B&W. I have a Rev 2. B&W with a G4 500. I had to purchase a 233MHz G3 to reset the bios. I had to set it to a FSB of 66MHz to get the machine to POST. Again just a quick thought. GOOD LUCK! -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
