On Feb 1, 2005, at 3:45 AM, Doug Hogg wrote:
Can you explain if you have just started using the hub, or was it working before and now it doesn't? Were you just using one printer attached to one computer?Date: Mon, 31 Jan 2005 23:03:58 -0800
Subject: Basic Networking
From: Kathi Anderson <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
...
My problem so far is that when I go to the Apple Talk setup I cannot get it
to select Ethernet on either of the G3's. It says that I should check my
connections. I have tried the simplest connection of all by using an
Ethernet cable directly from the G3 to the Apple printer. Restarted a couple
of times and I could not get a connection. What am I doing wrong? I figure
it has to be something really basic and simple, but like the good or bad
moon, I am not getting it. Can someone help me?
Usually if you can't select ethernet in OS 9, the computer can't see the hub. So it could be that
a) your computers' ethernet circuits are bad, or
b) your ethernet cables are bad, or
c) your hub isn't working.
Since you are having trouble connecting 2 computers, it seems most likely to me that your hub is the problem. I would try a different hub or, better yet, a switch which has the same function but directs traffic only to the computer that requested it.
Doug Hogg
A hub is not the same as a router. A router does a lot more, it stores information about all the computers and printers and negotiates between them. A hub just allows you to add computers or network printers to a subnet. Another thing is you might have a crossover CAT5 cable where you need a straight-through CAT5 cable. It matters with some hubs and routers. The proper way to get this to work would be 4 straight-through cables spidering out from a router to each computer and printer. Each one would need an address in the router's routing table, and you need to get into the printer to tell it what its address is. I have a 16/600 attached to my router and I can print from my iBook, my G5, and my Wallstreet. I needed to set up the printer's address with the printer utility, then put that address into the router.
-- G-List is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/>
iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
