On Oct 23, 2008, at 3:06 PM, Mel wrote: > What do you have connected to your Adaptec AUA-3020A FW/USB2 > Duoconnect PCI card? > > If you are using external HDs, can you boot from those drives? > > Mel > > --
I have an OWC Elite (I think that's the model) hard drive enclosure that is both USB2 and FW400, an Oxford 911 bridge type setup. Contains a Seagate 750GB ATA hard drive. Partitioned into Time Machine, Tiger 10.4.11, OS 9.1, APPS and DOCS partitions. CCC did not seem to successfully bless the OS X copy, although the CCC Log says differently ... it did not show up under Startup Disk Items when connected via USB2, but it did show up when connected by FW400. When you look at the partition, no folders had the usual icons for OS X, Applications, etc. Just plain folders. Would not startup under OS 9.1 from the FW drive either. I was hoping it would boot off the card ... but initial tests indicate not. I've read where the PCI Graphics won't boot off a FW off its own channel ... but I was hoping for a different story off a PCI card. Maybe someone knows how to correct this? InTech Speedtools or other might enable it? Bill Connelly artsite: http://mysite.verizon.net/moonstoneartstudio myspace: http://www.myspace.com/moonstoneartstudio --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
