On Dec 31, 2008, at 8:14 AM, insightinmind wrote:
> Is this normal behavior booting off a PCI IDE card in a PCI > Graphics, when no other drive is on the mobo channel? > Yes, in my experience. The ATA drives which are attached to the PCI card are emulated as SCSI drives, so the 'puter has to go through the entire mobo-based drives in a "roll-call", before finding none, and then doing a "roll- call" on all attached cards. It should be the same as for a SCSI drive connected to a PCI SCSI card, only a little bitt different. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com To unsubscribe from this group, send email to g3-5-list-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---