I know there are PCI video cards with DB-15 connectors, I have one
that I know works in the G4 towers, despite the fact that it's quite
old by now. I use it in my 7500, since the onboard video is dead. I
would search eBay, LEM swap, or whatever you prefer, it would seem
that would take care of your needs.

     -Cyrus



On Mar 4, 11:37 am, Evan Wilson <[email protected]> wrote:
> I need a VGA DB-15 PCI video card to install in slot #2 of my Yikes!  
> to drive my high resolution monochrome Apple Portrait Monitor (c.  
> 1990) next to my ViewSonic flat screen monitor running from slot #1.  
> Slots #3 and #4 presently run various Firewire and USB peripherals.
>
> Apple's manual accompanying my portrait monitor says it needs a  
> "NuBus expansion card" but my manual "Setting Up Your Power Macintosh  
> G4: Includes ... expansion information...." says "NuBus cards cannot  
> be used in **THESE** expansion slots" where "**THESE**" seems to mean  
> ATA slots only but could also mean all four slots -- depending on  
> careful reading.
>
> The Yikes! manual also says Apple Desktop Bus (ADB) ports are not  
> supported but the portrait monitor's manual says the monitor's  
> interface is ADB. What solution, if any, is suggested by all this?
>
> Here's what my System Profiler says about my current graphics and  
> display:
>
> ATY, Rage 128:
>    Chipset Model:       ATY, Rage 128
>    Type:        Display
>    Bus: PCI
>    Slot:        J12
>    VRAM (Total):        16 MB
>    Vendor:      ATI (0x1002)
>    Device ID:   0x5245
>    Revision ID: 0x0000
>    ROM Revision:        113-57407-204
>
> Display: VA2226w-11:
>    Resolution:  1680 x 1050 @ 60 Hz
>    Depth:       16-bit Color
>    Core Image:  Not Supported
>    Main Display:        Yes
>    Mirror:      Off
>    Online:      Yes
>    Quartz Extreme:      Not Supported
>
> Here's what my System Profiler says about my SCSI PCI cards:
>
> ADPT, 1686806-04:
>    Name:        ADPT, 2930CU
>    Type:        scsi
>    Bus: PCI
>    Slot:        J11
>    Vendor ID:   0x9004
>    Device ID:   0x5078
>    Subsystem Vendor ID: 0x9004
>    Subsystem ID:        0x7850
>    Revision ID: 0x0003
>
> The computer end of my portrait monitor's cable is eight pins over  
> seven pins.
>
> I used my portrait monitor throughout the period when my only  
> computer was a G3 Beige and then a G3 Blue and White.
>
> Evan
>
> Evan Wilson
> 6302 Mountain Park Cove
> Austin, Texas  78731-2611
> (512) 215-8543
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed Low End Mac's G3-5 List, a 
group for those using G3, G4, and G5 desktop Macs - with a particular focus on 
Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/g3-5-list?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---

Reply via email to