The G3 connects fine! Is the Performa the one not behaving! The Ethernet card goes into the PDS slot.
Gorka Enviado desde mi BlackBerry® de Vodafone -----Original Message----- From: Manuel Marques <[email protected]> Date: Thu, 6 May 2010 00:42:35 To: G-Group<[email protected]> Subject: Re: Beige G3 not booting from CD! > So far, I have been unable to get the thing into the net. I got an Asante > Ethernet card with a RJ-45 jack, but doesn`t like neither my modern routers > or my 10/100 switch..... > But are you using a PCI Ethernet card? Why don't you use the RJ-45 interface on the motherboard? (of course it is 10baseT, but it should work well if you're not doing any network-intensive work!) Asantes have trouble with auto-sensing routers... (at least the NuBus versions did, not sure about the PCI ones!) I have a IIci with an Asante card, and the solution for my problem was getting a 10baseT hub! :P MM -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list
