On my dual 2.7 here, the only external light that's on when running is
the one near the power switch. I don't see any lights around the
optical drive. Which light is it that is always on for you on your dual
2.7 machines? Somewhere inside the machine?
Valter Prahlad
November 1, 2011 7:22 PM
I have a G5 2.7 DP, and the red optical light is always on.
But I got it used, so I don't know if this is the default.
The audio output works fine, thou.
Both internal speaker, rear audio port (3,5mm), and front audio port.
jfMac
November 1, 2011 7:14 PM
Thanks for suggestions John.
On Nov 1, 12:14 pm, JOHN CARMONNE<[email protected]> wrote:
That red light is normal.
Can anybody else "chime" in here on the red light optical audio port?
Always lit up?
I would reset the CUDA switch near the RAM slots on the bottom of
the logic board. Be sure to disconnect all cables before doing this
also remove PRAM battery.
I did bite the bullet, and reset the PMU. The reset made difference,
so no internal speaker and thus no chime on startup.
Other ideas? Anybody know which kext is in control of the optical
audio port?
jfMac
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
For more options, visit this group at http://groups.google.com/group/g3-5-list
