Doug and all,
Yes, looks like great progress. (I am slow to reply because of
extensive travel).
How will all of this fine work be finalized? I think Doug said he was
going to provide final tech diagrams and photos, etc.
Let's make sure that this work is properly recorded and onto websites,
not just in the archives of the Listservs. I will try to have one (or
more) made in Illinois, USA.
Who else will participate in the replication and testing and reporting
of results about this (or similar) device?
Paul
Doc / Dr TLUD / Prof. Paul S. Anderson, PhD
Email: [email protected]
Skype: paultlud Phone: +1-309-452-7072
Website: www.drtlud.com
On 1/24/2014 4:23 PM, Jason wrote:
Great one Doug,
that is about what I had in mind and saves me that drawing :-) With
playing around with pivot points it would be feasible to get peak
leverage exactly where you want it,. Enough weight in the right place
returns the foot pedal to the start point. Yes you have proven the
concept.
Kind Regards
Jason
On Sat, Jan 25, 2014 at 10:45 AM, Doug <[email protected]
<mailto:[email protected]>> wrote:
Hi Jason and Colleagues,
Thanks for all the ideas that have been promoted, and as you can
see, I have completed all the variations possible within the
limitations imposed by existing mechanisms. This pedal linkage
allowed me to change rotating arcs, which in the end all determine
the distance of travel and the forces at the cutting edge.
Having proven the simple hand guillotine both works and with a
reasonable amount of force at the blade, that is the end of my
involvement to make the concept principles into some thing else.
It isn't hard for me to see, that larger mechanised versions could
have plenty of scope to be included in all sorts of cutting
applications, but don't expect me to design them for you(:-)
Will find time this week to draw up the design and make it
available on the Fluidyne Archive www.fluidynenz.250x.com
<http://www.fluidynenz.250x.com> as soon as possible, and advise
you accordingly.
Doug Williams,
Fluidyne.
> On Sat, 25 Jan 2014 08:42:51 +1300
> Jason <[email protected] <mailto:[email protected]>> wrote:
>
> > Doug,
> >
> > I have an idea for the foot lever but will need a day so to
get it drawn.
> > It MAY help the design and hopefully incorporate increasing
leverage to
> > solve the issue Mark outlines.
> >
> > Jason
--
Doug <[email protected] <mailto:[email protected]>>
_______________________________________________
Gasification mailing list
to Send a Message to the list, use the email address
[email protected]
<mailto:[email protected]>
to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
for more Gasifiers, News and Information see our web site:
http://gasifiers.bioenergylists.org/
_______________________________________________
Gasification mailing list
to Send a Message to the list, use the email address
[email protected]
to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
for more Gasifiers, News and Information see our web site:
http://gasifiers.bioenergylists.org/
_______________________________________________
Gasification mailing list
to Send a Message to the list, use the email address
[email protected]
to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
for more Gasifiers, News and Information see our web site:
http://gasifiers.bioenergylists.org/
