At 03:39 PM 3/16/02 -0500, The Shea's wrote: >I recently downloaded the Lite version and installed it on a machine I'm >using to protect a small home network. Although I'm a competent network and >firewall administrator and even though the GNAT box admin interface is not >very difficult I was unable to get the box totally functional. > >I was able to get the box to obtain an address from my ISP (DHCP). I was >also able to figure out how to register it and how to get the serial number >and feature codes updated (not the easiest thing if you misread the email ><grin>). I was also able to get the admin program to connect and make >configuration changes to the box. > >Here are the things that I was unable to do: > >1) Get basic DNS requests to flow to/through the box.
that should work by default. >2) Find any way to use the box as a DHCP server on my local subnet. (This >was not essential - but the help seems to indicate that this is a feature of >the software.) gb-lite does not support dhcp service - you need the full version for that... >Also, after failing with the lite version I downloaded the demo copy and I >was not any more successful with it. I do not have a comlex setup - basic >cable modem with DHCP on the ISP side and a small hub with a few clients on >the back side. No DMZ and no port forwarding required. post your config? --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
